Orion Car Audio CO652, CO552 owner manual Door Mounting, Rear Deck Mounting

Page 4

needs.. The locations must be large enough for the speakers to fit.. Care is needed to ensure that the location you have chosen will not affect any of the mechanical or electrical operations of the vehicle..

Determining the best location for the speakers will depend on your cosmetic needs and your vehicle's interior.. If minimal intrusion in your vehicle is desired, factory speaker locations may be the ticket for you.. Placing the speaker in the factory location can often give very desirable results..

Door Mounting

When checking for possible speaker locations in the doors, check the operation of the window and all assemblies.. There is also a stabilizer stop bar in between the door and the door jamb.. This bar prevents the door from opening too far.. Many shade tree installers overlook this and check for clearance only when the door is fully open..

Figure 1

Figura 1

Abbildung 1

Inside

Dampening Mat

 

of Door

 

Speaker

 

 

cut out

 

 

Speaker installed

Coaxial

 

with no gaps

 

or air leaks

Driver

 

 

 

Door

Grille

Screws

 

Panel

 

 

Dampening on

 

 

top of outer

 

 

door skin

 

 

Rear Deck Mounting

In rear deck installations, check the operation of the trunk suspension springs or tension bars.. These tension bars move in the opening and closing of the trunk.. You cannot be too cautious during this part of the installation, In addition, do not locate the speakers too close to the back of the rear deck.. Installing the far screws will only be possible with the removal of the rear window..

Rear Seat

Rear/Trunk

 

of Car

Figure 2

Figura 2

Abbildung 2

© 2008 directed electronics—all rights reserved

3

Image 4
Contents Component Speaker Introduction Table of ContentsPractice Safe Sound Installing Process What’s in the BoxTools of the Trade Finding Speaker Mounting LocationsDoor Mounting Rear Deck MountingInstalling the Mid/Woofers Surface Mounting Installing the TweeterFull Flush Mounting Installing the Crossover Figura Abbildung Flush MountWiring Diagram Specifications FeaturesInstallation DES HAUT-PARLEURS Médiaux ET DE Graves FrançaisOÙ Monter LES HAUT-PARLEURS Montage SUR UNE PortièreMontage EN Surface Installation DU HAUT-PARLEUR DaigusMontage Encastré Spécifications Installation DU RépartiteurCaractéristiques Page Español Ubicaciones DE Montaje DE LOS AltavocesMontaje EN LA Puerta Montaje EN LA Repisa TraseraMontaje EN Superficie Instalación del TweeterMontaje AL RAS Especificaciones Instalación DEL CrossoverCaracterísticas Page Deutsch SO Platzieren SIE DIE LautsprecherTüreinbau Einbau IM KofferraumOberflächeneinbau Einbau des HochtönersBündiger Einbau Daten Installation DER CROSSOVER-EINHEITEigenschaften Page Installazione DEI MIDRANGE/WOOFER ItalianoMontaggio Sulle Portiere Montaggio NEL Piano Portaoggetti PosterioreMontaggio a Superficie Installazione del tweeterMontaggio a Filo Dati Tecnici Installazione DEL CrossoverCaratteristiche Page Português Determinação DOS Locais Para Instalação DOS ALTOS-FALANTESInstalação NAS Portas Instalação no Painel TraseiroInstalação NA Superfície Instalação do tweeterInstalação Embutida Instalação do Crossover EspecificaçõesPage Warranty