TP SERIES SPEAKERS
Congratulations on your purchase of an excellent, high performance loudspeaker system from MTX! We are confident that your purchase will bring you years of listening pleasure.
MTX’s TP speakers consists of single 10" and single or dual 12” woofers matched with our Generation 2
Your speakers carrying handles, mounted to a strong, lightweight cabinet make it easily portable to use anywhere you need it. The rugged corner braces allow for upright positioning and interlock for secure stacking of multiple cabinets. The versatile
WARNING: To avoid injury, DO NOT SUSPEND the enclosure.
AMPLIFIER CONSIDERATIONS
Your speaker system specifications list RMS power and Peak power ratings. Power amplifiers are also typically rated using RMS power, which is an indication of the power level an amplifier is able to continuously deliver to a loudspeaker without damage or distortion to the amplifier. Consult your amplifier owners manual to confirm power output at the rated impedance at which your amplifier will be operating with the speakers connected. These ratings should be considered when selecting the best amplifier to power your system. For general use, amplifier output should match or exceed the RMS rated power of the speaker system.
WARNING: Overpowering could cause serious damage to the loudspeak- er.
HOOK UP
Your TP speaker comes equipped with
CAUTION: Be sure your amplifier is turned off before you make any wire connections.
5-Way Binding Posts
Use color coded, two conductor or stranded, twisted pair wire to connect your speaker to an amplifier using the
different color insulation (red and black, for example). Be sure to connect (+) on the speaker
to (+) on the amp, and
1) | Separate the conductors at each end for about two | 2 inches |
|
|
|
| |||
|
| |||
| inches. |
|
|
|
|
|
|
| |
2) | Strip away 1/2” of insulation from the end of each |
|
|
|
| conductor. |
|
|
|
3) | Unscrew the positive (+) terminal and insert the (+) |
|
|
|
|
|
| ||
| stripped end of a conductor wire into the hole on the |
| 1/2 inch |
|
|
|
| ||
|
|
| ||
| side of the terminal post. |
|
|
|
4)Hand tighten the terminal to secure the wire in place.
5) Connect the conductor wires other stripped end to the amplifiers (+) terminal.
6) Repeat steps
Warranty Statement
MTX products purchased in the USA from an authorized MTX dealer are guaranteed against defects in material and workmanship for a period of FIVE YEARS, the warranty period begins the day the product is purchased by the end user. This warranty is limited to the original retail purchaser of the product. Product found to be defective during that period will be repaired or replaced by MTX at no charge. This warranty is void if it is determined that unauthorized parties have attempted repairs or alterations of any nature. Warranty does not extend to cosmetics or finish. Before presuming a defect is present in the product, be certain that all related equipment and wiring is functioning properly. MTX disclaims any liability for other incurred damages resulting from product defects. Any expenses in the removal and reinstallation of products are not covered by this warranty. MTX's total liability will not exceed the purchase price of the product. If a defect is present, your authorized MTX dealer may be able to effect repairs.
Proof of purchase is required when requesting service, so please retain your sales receipt and take a moment to register your product on line at mtx.com. Also, a Return Authorization number (RA) is required before shipping product back to MTX, call