Connecting the Power Cord
AC INLET
Supplied power cord
To an AC wall outlet (Plug type varies from country to country.)
1Make sure that the main power of the power amplifier is turned off.
2Connect all of your components.
3Connect the supplied power cord to the amplifier’s
AC INLET.
4Plug the power cord into an AC wall outlet.
En
Tip
•To reduce noise, do not tie the signal cable and power cable together. Wire them so that they are away from each other.
Note
•Never disconnect the power cord from the power amplifier while the other end is still plugged into a wall outlet. Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet first, and then the power amplifier.
•Turning on the power amplifier may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the power amplifier into a different branch circuit.
•Do not use a power cord other than the one supplied with the power amplifier. The supplied power cord is designed exclusively for use with the power amplifier and should not be used with any other equipment.
16