Onkyo M-5000R instruction manual Specifications, Amplifier Section, General Section

Specifications

M-5000R

Amplifier Section

Rated Output Power

North American:
(Stereo)	80 watts minimum continuous power per
	channel, 8 ohm loads, 2 channels driven from
	20 Hz to 20 kHz, with a maximum total
	harmonic distortion of 0.05% (FTC)
	100 watts minimum continuous power per
	channel, 8 ohm loads, 2 channels driven at
	1 kHz, with a maximum total harmonic
	distortion of 1% (FTC)
	150 watts minimum continuous power per
	channel, 4 ohm loads, 2 channels driven from
	20 Hz to 20 kHz, with a maximum total
	harmonic distortion of 0.05% (FTC)
	170 watts minimum continuous power per
	channel, 4 ohm loads, 2 channels driven at 1 kHz,
	with a maximum total harmonic distortion of
	1% (FTC)
(BTL mono)	180 watts minimum continuous power per
	channel, 8 ohm loads, 1 channel driven from
	20 Hz to 20 kHz, with a maximum total
	harmonic distortion of 0.05% (FTC)
	200 watts minimum continuous power per
	channel, 8 ohm loads, 1 channel driven at 1 kHz,
	with a maximum total harmonic distortion of
	1% (FTC)
	220 watts minimum continuous power per
	channel, 6 ohm loads, 1 channel driven from
	20 Hz to 20 kHz, with a maximum total
	harmonic distortion of 0.05% (FTC)
	250 watts minimum continuous power per
	channel, 6 ohm loads, 1 channel driven at 1 kHz,
	with a maximum total harmonic distortion of
	1% (FTC)
European:	2 ch ⋅ 80 W at 8 ohms, 20 Hz - 20 kHz, 0.05 %,
(Stereo)
	2 ch driven (IEC)
	2 ch ⋅ 150 W at 4 ohms, 20 Hz - 20 kHz, 0.05 %,
	2 ch driven (IEC)
	2 ch ⋅ 100 W at 8 ohms, 1 kHz, 1 %, 2 ch driven
	(IEC)
	2 ch ⋅ 170 W at 4 ohms, 1 kHz, 1 %, 2 ch driven
	(IEC)
(BTL mono)	1 ch ⋅ 180 W at 8 ohms, 20 Hz - 20 kHz, 0.05 %,
	1 ch driven (IEC)
	1 ch ⋅ 220 W at 6 ohms, 20 Hz - 20 kHz, 0.05 %,
	1 ch driven (IEC)
	1 ch ⋅ 200 W at 8 ohms, 1 kHz, 1 %, 1 ch driven
	(IEC)
	1 ch ⋅ 250 W at 6 ohms, 1 kHz, 1 %, 1 ch driven
	(IEC)

Dynamic Power*	460 W (1 Ω)
* IEC60268-Short-term maximum output power	320 W (2 Ω)
	245 W (3 Ω)
	196 W (4 Ω)
	142 W (6 Ω)
	110 W (8 Ω)
THD+N (Total Harmonic Distortion+Noise)	0.02 % (20 Hz - 20 kHz, half power)
	0.005 % (1 kHz, half power)
Damping Factor	130 (1 kHz, 8 Ω)
Input Sensitivity and Impedance (Unbalance)	700 mV/10 kΩ (RCA)
Input Sensitivity and Impedance (Balance)	1.4 V/10 kΩ (BTL)
Frequency Response	10 Hz - 100 kHz/+0 dB, –1 dB 1 W/8 Ω
	1 Hz - 250 kHz/+0 dB, –3 dB 1 W/8 Ω
Signal to Noise Ratio	110 dB (RCA, IHF-A)
Speaker Impedance	RCA Stereo: 4 Ω - 16 Ω
	XLR MONO: BTL 6 Ω - 16 Ω
HICC	150 A

General Section

Power Supply	North American: AC 120 V, 60 Hz
	European: AC 230 V, 50 Hz
Power Consumption	North American: 8.4 A
	European: 280 W
Standby Power Consumption	North American: 0.15 W
	European: 0.2 W
Dimensions (W ⋅ H ⋅ D)	435 W ⋅ 187.5 H ⋅ 432.5 D mm
	(17-1/8 W ⋅ 7-3/8 H ⋅ 17 D inches)
Weight	23.5 kg (51.8 lbs.)

■ Audio Inputs

Analog Stereo Inputs	RCA IN-L, RCA IN-R
Balance Inputs	XLR IN

■ Audio Outputs

Speaker OutputsLch, Rch

■ Others

12V Trigger In 1/Out 1

Specifications and features are subject to change without notice.

En

23