Receiving Channels with the SAT Radio Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with over 100 digital audio channels. For a small monthly fee, subscribers can hear
To receive SAT Radio, the separately sold XM Direct™ or SIRIUS Satellite Radio Tuner and an appropriate
•The SAT Receiver controls on the
1 Press 
SOURCE to activate the SAT Radio mode.
2 Press BAND to select one of the three SAT Radio Preset Bands.
Each press changes the band:
XM mode:
SIRIUS mode:
3 Press 
or 
to select the desired channel.
Holding down 
or 
will change channels continuously.
•When using the optional remote control
1While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control.
2Press ENTER on the remote control within 5 seconds to receive the Channel.
If the channel number is 3 digits, the Channel is automatically received after the channel number has been input.
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number.
This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. It is printed on a label found on the SAT Receiver.
It can also be displayed on the screen of the
XM:
1 While receiving a XM Radio band, press 
or
to select channel “0” for XM.
2 To cancel the ID number display, select the channel other than “0.”
SIRIUS:
1 While receiving a SIRIUS Radio band, press 
or
to select channel “255” for SIRIUS.
2 To cancel the ID number display, set the channel to other than “255”.
•You cannot use “O,” “S,” “I,” or “F” for the ID Number (XM radio Receiver only).
•You can check the ID number printed on a label on your third party, SAT Radio Receiver package.
Storing Channel Presets
1 Press BAND to select the desired band you want to store.
2 Press 
(PRESET).
The Preset screen is displayed.
3 Rotate the Double Action encoder to select the preset number.
4 Press and hold 
/ENTER for at least 2 seconds.
The selected station is stored.
5 Repeat the procedure to store up to 5 other channels onto the same band.
•To use this procedure for other bands, simply select the band desired and repeat the procedure.
•A total of 18 channels can be stored in the preset memory (6 channels for each band;
•If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one.
Receiving Stored Channels
1 Press BAND to select the desired band.
2 Press 
(PRESET).
The Preset screen is displayed.
3 Rotate the Double Action encoder to select a radio station.
4 Press 
/ENTER.
Storing the desired Sports Team (SIRIUS only)
Store a favorite team from one of the available leagues SIRIUS covers. Once stored, game times and scores for that team are announced using the interruption Alert display while receiving other programming. To receive these announcements, refer to page 29.
This function becomes effective after performing the following two operations.