Alpine 68-13530Z42-A, iDA-X305S owner manual 47-EN

Page 49

Antenna Receptacle

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

•This lead should be used only for controlling the vehicle’s power antenna. Do not use this lead to turn on an amplifier, or a signal processor, etc.

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

Audio Interrupt In Lead (Pink/Black)

Illumination Lead (Orange)

This lead may be connected to the vehicle’s instrument cluster illumination lead. This will allow the backlighting of the iDA-X305S to dim whenever the vehicle’s lights are turned on.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s battery.

Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

Power Supply Connector

Right Front (+) Speaker Output Lead (Gray) Right Front (-) Speaker Output Lead (Gray/Black) Right Rear (-) Speaker Output Lead (Violet/Black) Right Rear (+) Speaker Output Lead (Violet)

Left Rear (+) Speaker Output Lead (Green)

Left Rear (-) Speaker Output Lead (Green/Black) Left Front (-) Speaker Output Lead (White/Black) Left Front (+) Speaker Output Lead (White)

Fuse Holder (10A)

Ai-NET Connector

Connect this to the output or input connector of another device (CD Changer, Equalizer, HD Radio™ TUNER MODULE, etc.) equipped with Ai-NET.

•Be sure to set “Setting the Connected Head Unit (MODEL SETUP)” to “DVD CHG”, when the DHA-S690 is connected.

•Interface adapter for iPod (KCA-420i) is not recommended for use with this product.

Steering Remote Control Interface Connector

To steering Remote control interface box.

For details about connections, consult your nearest Alpine dealer.

Rear Output/Input RCA Connectors

It can be used as Rear Output or Input RCA Connectors. RED is right and WHITE is left.

Front Output/Input RCA Connectors

It can be used as Front Output or Input RCA Connectors. RED is right and WHITE is left.

Subwoofer RCA Connectors

RED is right and WHITE is left.

Ai-NET Cable (Included with CD Changer)

RCA Extension Cable (sold separately)

BLUETOOTH Interface Connector

Connect this to an optional BLUETOOTH INTERFACE (KCE-400BT).

To use a hands-free mobile phone, an optional BLUETOOTH INTERFACE connection is required. For details on connection, refer to the Owner’s Manual of the BLUETOOTH INTERFACE. You can input the audio of an external device, (such as a Portable audio player) to the BLUETOOTH interface connector of this unit. A special Conversion cable (KCE-237B) is necessary to adapt the BLUETOOTH interface connector as an AUX IN.

System Switch

When connecting a processor or divider using Ai-NET, place this switch in the EXT AP position. When no device is connected, leave the switch in the NORM position.

•When the IMPRINT audio processor is connected, set to EXT AP position.

•Be sure to turn the power off to the unit before changing the switch position.

USB Connector

Connect USB cable.

USB cable

Connect this to a USB memory/Portable audio player or to an iPod/iPhone. To use an iPod/iPhone, iPod Dock interface cable connection is required.

•Use the supplied USB cable. If a USB cable other than the supplied is used, correct performance cannot be guaranteed.

•Route the USB cable away from other cables.

To prevent external noise from entering the audio system.

•Locate the unit and route the leads at least 10 cm away from the car harness.

•Keep the battery power leads as far away from other leads as possible.

•Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

47-EN

Page 48 Page 50
Image 49
Page 48 Page 50
Contents IDA-X305S Page Contents Operating Instructions SAT Radio Receiver Optional Installation and Connections Operating Instructions On Handling USB Memory Double Action Encoder Operation Adjusting Volume Turning Power On and OffSetting the Time and Calendar Getting StartedRadio How to View the DisplayDisplaying the Calendar/Time Press ViewPresetting Stations Automatically Presetting Stations ManuallyTuning to Preset Stations Listening to RadioIPod/iPhone Changing the Display HD Radio mode only10-EN About iPod/iPhone usable with this unitSearching for a desired Song/Title Playback11-EN To pause playback, pressUp/Down Function Search Position Memory12-EN Random Play Shuffle All Random Play ShuffleRepeat Play Changing the DisplayListening to Pandora Pandora Radio iPhoneThumbs Feedback 14-ENBookmarking a Desired Song or Artist Searching for a Desired StationQuickMix 15-EN16-EN USB memory/ Portable audio player/ChangerChanger CD screen display example if no CD text exists Multi-Changer Selection Optional Selecting a Disc Changer OptionalSelect the desired Folder Folder up/ down MP3/WMA/AAC 17-ENSearching for CD Track Number CD changer only X. Random Play18-EN Press /ENTER during playAbout MP3/WMA/AAC USB memory mode19-EN 20-EN TerminologySetting the Bass Control Sound SettingSetting the Bass Center Frequency Setting the Bass BandwidthAdjusting the High Pass Filter Setting the Treble ControlPress to return to normal mode Turning Subwoofer ON/OFFPress and hold for 2 seconds to return to normal mode Bluetooth SettingSetting the Bluetooth Connection Bluetooth 23-EN24-EN General Setting25-EN Display SettingHD Radio Setting Only when HD Radio Tuner is connected IPod/iPhone SettingAudio Setting 26-EN27-EN SAT Radio Receiver OptionalReceiving Channels with the SAT Radio Receiver Optional Storing Channel PresetsChecking the SAT Radio ID Number Receiving Stored ChannelsGame Alert Setup Canceling the stored Alert Memory Sirius onlyPress to cancel the Function mode Storing while receiving a game broadcastSelect the desired Category Category up/down Search FunctionReceiving Weather or Traffic Information from SAT Radio Instant Replay Function Sirius only31-EN Setting the Auxiliary Data Field DisplayAdjusting Sound Setting in Manual Mode Changing MultEQ modeImprint Operation Optional 32-ENEqualizer Presets Factory’s EQ Setting the MX LevelSetting the Subwoofer System Setting the Subwoofer PhaseSetting the Time Correction Unit Setting the Filter typeSound Field Adjustment 34-EN35-EN 36-EN Storing and Recalling the Adjusted ContentsExample 1. Listening Position Front Left Seat About Time CorrectionExample 2. Listening Position All Seats 37-EN3WAY Mode SUBW. ModeAbout the Crossover 38-ENCase of Difficulty InformationIndication for USB memory Indication for Portable audio player Mode40-EN Indication for CD Changer Indication for SAT Receiver Mode41-EN 42-EN Specifications43-EN Installation and Connections44-EN Installation45-EN 46-EN Connections47-EN This Warranty does not cover the following Limited Warranty
Related manuals
Manual 49 pages 35.94 Kb
Top Page Image Contents