Cassette Deck Descriptions and Functions

Cassette Deck

Descriptions and Functions

		�
	�	�
	�	�
		�
		�
		�

�

��

1.LEVEL KNOB - When recording to the cassette deck, use this control to increase or decrease the incoming signal level for precise recording results.

2.LEVEL INDICATOR - This LED meter reﬂ ects the record signal level in “real-time” to allow for accurate record level adjustment.

3.CASSETTE DECK - Insert the tape here.

4.EJECT BUTTON - Press to open cassette door and insert or remove a tape.

5.COUNTER DISPLAY - Use the tape counter when playing or recording cassettes to keep track of your location on the tape.

6.COUNTER RESET - Reset the counter to zero.

7.SPEED ADJUST KNOB - Adjust the speed of your playback/recording by turning clockwise to increase the speed, turn counter-clockwise to decrease speed.

8.PLAYBACK INDICATOR - This indicates the playback mode enabled.

9.MODE BUTTON - Select three playback modes : SINGLE SIDE PLAYBACK, DUAL SIDE PLAYBACK, CONTINUOUS PLAYBACK.

10.CASSETTE DECK CONTROLS:

REC - To enable record mode, press this button. For detailed instructions see “Cassette Deck Recording.”

REW - When playing a cassette, this key can be used to rewind the cassette to the previous location.

R. PLAY - Play the reverse side of the tape.

STOP - Press this key to stop a cassette from playing or recording.

F. PLAY - Play the forward side of the tape.

F. FWD “FAST FORWARD” - When playing a cassette, this key can be used to advance the cassette to the next desired location.