Rear Panel
Descriptions and Functions
� | � | � | � | � | � |
��
� | � � �� | �� | �� | �� |
1.HEADPHONE OUTPUT - Connect headphones to this ¼” input.
2.XLR MICROPHONE INPUTS - Connect three XLR microphone connections here. Each input corresponds with controls on the front panel of the
3.XLR STEREO OUTPUT - Output the
4.NTSC/PAL SELECTOR SWITCH - This switch is used to select the NTSC/PAL setting according to country. For U.S. televisions systems it should be set to NTSC and for European television systems the selector should be set to PAL.
5.VOLTAGE SELECTOR SWITCH - This switch is used to select the voltage setting according to country. For use in the U.S. the voltage selector should be set to 115V and 230V in Europe.
6.115V/230V AC OUTLET - This outlet can be used to connect another component providing it does not exceed 250 watts maximum power consumption.
7.SPEAKER JACKS - Use these speaker jacks to connect speakers.
8.AUX AUDIO INPUT - Connect RCA stereo cables from your audio output device.
9.DVD INPUT - Connect RCA stereo and video cables from your DVD player output.
10.MEDIA INPUT - Connect any additional media player or audio output device to this audio/video RCA connection.
11.AUDIO
12.VIDEO OUTPUT - Output the video from your
13.EFFECT LOOP INPUT/OUTPUT - These jacks allow an External Effect or EQ Device to be connected to the CDG- 6000RV and applied to the source music (see page 10 for more details)
NOTE: When an External Effect or EQ Device is not connected, the EFFECT LOOP BARS must be inserted for speaker output.
14.POWER INPUT - Connect the power cord (included) here.
17