Mitsubishi Electronics XD2000U Setting up your projector, Screen size and projection distance

Setting up your projector (continued)

Screen size and projection distance

Refer to the following table to determine the screen size.

Front projection

Front projection, ceiling mounting

H1HH2

W1W

L

W1

L

W1	W	W1
H1
H
H2
L		L

When the aspect ratio of the screen is 4:3

	Screen size						Projected distance (L)							Lens movable range
4:3 Diagonal size		Height (H)		Width (W)			Min.		Max.			(H1)			(H2)	width (W1)
inch	cm	inch	cm	inch	cm	inch		m	inch	m	inch		cm	inch	cm	inch	cm
40	102	24	61	32	81	54		1.4	74	1.9	12		30	2	6	3	8
60	152	36	91	48	122	82		2.1	112	2.8	18		46	3	9	5	12
80	203	48	122	64	163	110		2.8	150	3.8	24		61	4	11	6	16
100	254	60	152	80	203	138		3.5	189	4.8	30		76	6	14	8	20
150	381	90	229	120	305	208		5.3	284	7.2	45		114	8	21	12	30
200	508	120	305	160	406	279		7.1	380	9.7	60		152	11	28	16	41
250	635	150	381	200	508	349		8.9	476	12.1	75		191	14	36	20	51
300	762	180	457	240	610	419		10.6	571	14.5	90		229	17	43	24	61

•The above figures are approximate and may be slightly different from the actual measurements.

•The lens movable range shows distances from the factory default position.

LENS SHIFT button

To adjust the positions of the projector and the screen, use LENS SHIFT button.

1.Press the LENS SHIFT button.

2.Press the ￿, ￿,￿ or ￿button to move the image position.

Every time the ￿ button is pressed, the image moves down.

Every time the ￿ button is pressed, the image moves up.

Every time the ￿ button is pressed, the image moves to the right.

Every time the ￿ button is pressed, the image moves to the left.

•When you hold down these buttons for 2 seconds or longer, the displayed image moves fast in the corresponding directions.

•Be careful not to be caught in the opening in the lens while the lens is moving.

EN-12