Tannoy TS Sub owner manual Remote Control, Care of Cabinet

Page 6

SETUP Controls

This menu is accessed by pressing the ENTER (centre) button for more than three seconds, and gives access to the following options, selected by the UP and DOWN buttons:

LOWPASS- This is used to adjust the subwoofer’s upper frequency limit to achieve a correct balance with the main speakers. The LEFT and RIGHT buttons give a range of 50Hz to 150Hz. Attempting to increase the limit beyond 150Hz switches the subwoofer filter out, into so called LFE mode (Low Frequency Effects), where the filters in the AV receiver are left to set the transition to the main speakers, generally at 80Hz. This is the most common form of operation, but refer to the manual of your AV receiver for more details. Sometimes, in a difficult acoustic environment, it is beneficial to provide additional filtering within the subwoofer, even though the AV receiver has been set in LFE mode.

PHASE- This can be adjusted between 0 degrees (in phase) to 180 degrees (out of phase), using the LEFT and RIGHT buttons. The correct setting depends on room acoustics and the position of the subwoofer in the room. Starting with the 0 degrees setting, then the 180 degree setting, see which one results in the greatest amount of bass at the listening position, being aware that all bass frequencies should sound evenly balanced. This is generally easier to achieve using music. If neither setting is satisfactory, try the intermediate settings.

SHELF- This gives either a progressive increase or reduction of output with reducing frequency, down to 35Hz. A range from -6dB to +6dB is available using the LEFT and RIGHT buttons respectively. This control can be used to tailor to subwoofer more accurately to the room or to personal taste. This function is intended for advanced users or installers, and for general use should be set to 0dB (IE no boost or cut applied).

PEQ GAIN- Parametric Equaliser gives a boost or cut to a narrow range of frequencies to compensate for room resonances and other effects, and is again aimed at advanced users and installers. A range from -6dB to +6dB is available using the LEFT and RIGHT buttons respectively.

PEQ WIDE- This selects the width of frequencies boosted or cut. Use either the LEFT or RIGHT buttons to select between NARROW (Q=6), NORMAL (Q=3.5) or WIDE (Q=2).

PEQ FREQUENCY- Selects the frequency at which the maximum boost or cut occurs. Use the LEFT and RIGHT buttons to vary between 20Hz and 100Hz.

POWER- Use either the LEFT or RIGHT buttons to select subwoofer ON, OFF or AUTO. In AUTO mode, the subwoofer will switch on in the presence of a signal, reverting to STANDBY if no signal is detected for approximately 15 minutes. In ON mode, the subwoofer is left powered continuously. ON state is indicated by the light behind the speaker cloth glowing green, while OFF or STANDBY is indicated by red.

BRIGHTNESS- Use either the LEFT or RIGHT buttons to set display brightness to LOW, MEDIUM and HIGH. EXIT- Use either LEFT or RIGHT buttons to select YES or NO, then centre button to exit to the initial default screen.

REMOTE CONTROL

An IR remote control sensor is provided behind the grille cloth on the front of the subwoofer, to enable USER settings to be changed by a universal remote control or system controller.

The hexadecimal control codes are as follows:

Manufacturer code:

A55A

Volume up:

20DF

Volume down:

A05F

Audio:

807F

Video:

C03F

Night:

40BF

Power:

00FF

Please refer to the instruction manual for your remote control or system controller, as Tannoy are not able to offer technical support in this matter. A dedicated remote control is not available.

CARE OF CABINET

Clean only with a soft dry cloth. The front speaker grille assembly is not removable.

Image 6
Contents SUB Important Safety Instructions Fuse Protection FCC Information USA onlyFitting of Feet WarrantyUnpacking PositioningFor Line Level Connection Connecting to Your SystemControls and Adjustments For Speaker Level ConnectionRemote Control Care of CabinetRear Panel Layout TS1001 Rear Panel Layout TS801Rear Panel Layout TS1201 Right Hi Level In Left Low LevelTechnical Specification Additional FeaturesPage SUB 6481 0553

TS Sub specifications

The Tannoy TS Sub is a high-performance subwoofer designed to deliver powerful and accurate bass reproduction, making it an ideal choice for both home audio systems and professional audio applications. With its robust build quality and advanced technologies, the TS Sub provides an immersive audio experience that enhances music, movies, and any multimedia content.

One of the main features of the Tannoy TS Sub is its dedicated high-excursion driver. This specially designed 10-inch driver works in conjunction with a powerful amplifier to provide deep, impactful bass that can be felt as much as it can be heard. The driver technology helps to minimize distortion and maintain clarity even at high output levels, ensuring a true representation of the audio content.

The TS Sub boasts a frequency response that extends down to 30 Hz, allowing it to reproduce the lowest lows in music and soundtracks with precision. This capability helps to create a more realistic and engaging listening environment, making it perfect for film lovers, music enthusiasts, and gamers who desire an enhanced auditory experience.

Another notable feature is the adjustable low-pass filter, which allows users to integrate the subwoofer seamlessly with existing speaker systems. This flexibility means that the TS Sub can adapt to various room acoustics and speaker configurations, ensuring optimal performance no matter the setup. The phase switch further aids in aligning the subwoofer with the main speakers, providing a cohesive soundstage.

Tannoy also incorporates advanced connectivity options in the TS Sub, including both RCA and high-level inputs. This versatility enables easy integration with a wide range of audio sources, whether it's a home theater receiver, stereo system, or professional audio equipment. The subwoofer’s compact design makes it space-efficient, allowing it to fit comfortably in any environment.

Moreover, Tannoy’s commitment to quality is evident in the build of the TS Sub. It features a sturdy cabinet design that minimizes unwanted resonance and vibration, ensuring that the focus remains on clean, powerful bass. The aesthetic appeal is also noteworthy, with a sleek finish that can complement a variety of home decors.

In summary, the Tannoy TS Sub combines advanced driver technology, flexible connectivity options, and robust construction to deliver exceptional bass performance. Whether used in a home audio setup or a professional environment, this subwoofer stands out for its quality and performance, making it a popular choice among audiophiles and sound professionals alike.