Sharp PN-E471, PN-E421 manual Adjustments for PC screen display, NAutomatic adjustment

Page 16

Menu Items

nADVANCED items (AV input) (See page 10 for additional Menu item details.)

FLESH TONE

Adjust the hue control.

3D-NR

Reduce the noise of playback images on video.

Setting a higher level reduces more noise. However, it may cause blurring on an image.

MPEG-NR

Reduce block noise caused by digital compression.

3D-Y/C (AV VIDEO)

Specify whether to perform 3-dimension Y/C separation. If dot interference or cross-color is occurring in fast-motion scenes, selecting “OFF” may improve the image quality.

C.M.S.-HUE

Adjusts color tone with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).

C.M.S.-SATURATION

Adjusts color vividness with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).

C.M.S.-VALUE

Adjusts color brightness with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).

TIPS

•When FLESH TONE is set to LOW or HIGH, C.M.S.-HUE/

-SATURATION/-VALUE cannot be set.

Adjustments for PC screen display

nAutomatic adjustment

When you use the PC D-sub input terminal or PC RGB input terminals to display a PC screen for the first time, or when you change the setting of the PC, use the automatic screen adjustment.

1.Switch the input to PC D-SUB or to PC RGB and display the adjustment pattern. (See the description below.)

2. Press and use or to display the SCREEN menu.

3.Press and select “AUTO”.

4.Press .

The automatic adjustment is complete in several seconds.

5.Press twice to close the menu screen.

TIPS

•If the screen cannot be adjusted properly with one automatic adjustment, repeat the automatic adjustment two or three times. Try manual adjustment if necessary.

nScreen display for adjustment

Before making adjustments in the SCREEN menu or PICTURE menu, display an image to brighten the entire screen. If you are using a Windows PC, use the adjustment pattern on the supplied CD-ROM.

Opening the adjustment pattern

The following example is performed in Windows XP.

1.Load the supplied CD-ROM into the computer’s CD- ROM drive.

2.Open the CD-ROM in [My Computer].

3.Double-click [Adj_uty.exe].

The adjustment pattern will appear.

Adjust the screen automatically or manually.

4.When adjustment is finished, press the [Esc] on the computer’s keyboard to quit the adjustment program.

5.Eject the CD-ROM from the CD-ROM drive.

TIPS

•If the display mode on the computer you are using is

65,000 colors, the color levels in the color pattern may appear differently or grayscale may appear to be colored.

(This is due to the specifications of the input signal and is not a malfunction.)

E16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents PN-E471 PN-E421 Contents NFront view Part NamesNRear view Part Names NRemote control unit Signal transmitter Power button Display button SeeMode button See Size button See Menu button See Mute button SeeBasic Operation DisplayMute MenuBasic Operation NSwitching the screen size Wide Zoom NormalDot by Dot Cut offMenu Items Displaying the menu screenNExample of operation NMenu screen displayBaud Rate LAN Setup Speaker Select Option DC OUT Setting List of menu itemsMenu Items Menu PN-ZB01 optional Not attached AttachedSome items may not be displayed depending on the input mode LinesPIP/PbyP PbyP2 POSNSCREEN Menu item detailsNPICTURE 11 E NSETUPNAUDIO Menu Items NOPTION NENLARGE PC inputNPIP/PbyP 13 EMenu Items NDual screen display NZOOM2 Special Setting Setting procedureMenu Items NEnlarge Enlarge menu, set Enlarge H/V and ENLARGE-POS H/V. SeePower 15 ENSCHEDULE DAY of the WeekNAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment 17 E Communication procedure Controlling the Monitor with a PC RS-232CPC connection Communication conditionsNCommunication interval 19 ENID numbers 002 VOLM0030VOLM0020 ← OK 002 IDLK0000 ← Wait ← OK 002 ← VOLM0010 OK 001 ←Setting of the Gamma user data 21 ERS-232C command table Power control/Input mode selectionHow to read the command table Controlling the Monitor with a PC RS-232CControlling the Monitor with a PC RS-232C Picture menu 23 EAudio menu Controlling the Monitor with a PC RS-232C Setup menu 25 E Controlling the Monitor with a PC RS-232C Option menuImage Position Epos setting 27 E Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C PIP/PbyP menu Commands for setting of the Gamma user data Controlling the Monitor with a PC RS-232C OthersSettings to connect to a LAN Controlling the Monitor with a PC LAN29 E To set on the monitorDefault Gateway 0.0 This monitor is factory preset as shown below IP AddressControlling the Monitor with a PC LAN To set from a PC 31 E Controlling with a PCControlling the Monitor with a PC LAN Basic operationSetup See Information about this monitor appearsMonitor’s menu Screen SeeUser Name / Password 33 EDNS Server Accept IP AddressInstallation Information NAME/LOCATION AuthenticationAccount Name / Password Monitor Name35 E Recipient E-MAIL AddressesCondition ConfirmationSnmp Setting Trap SettingTrap When Authentication Fails VersionTroubleshooting 37 ESpecifications NProduct SpecificationsVesa DDC2B Vesa DPMS, DVI DmpmSpecifications NDimensional Drawings39 E Dmpm Digital Monitor Power Management Specifications NPower managementNDDC plug and play NCompatible signal timing AV Specifications NCompatible signal timing PC41 E Specifications NPC/AV DVI-D input terminal pins NPC D-sub input terminal pinsNPC/AV DVI-D output terminal pins NPC/AV Hdmi input terminal pinsPN-E471E421 G EN10B2
Related manuals
Manual 43 pages 47.52 Kb Manual 16 pages 12.04 Kb
Top Page Image Contents