Sharp PN-E471 manual RS-232C command table, Controlling the Monitor with a PC RS-232C, Screen menu

Controlling the Monitor with a PC (RS-232C)

RS-232C command table

How to read the command table
Command:	Command field (See page 18.)
Direction:	W When the “Parameter” is set in the parameter field (see page 18), the command functions as described
	under “Control/Response Contents”.
	R The returned value indicated under “Reply” can be obtained by setting “????”, “	?” or “???+”
	(repeater control) in the parameter field (see page 18).
Parameter:	Parameter field (See page 18.)
Reply:	Response (Returned value)
*1:	“●” indicates a command which can be used in power standby mode regardless of the STANDBY MODE
	setting.
	“○” indicates command which can be used in power standby mode when STANDBY MODE is set to
	STANDARD. (It cannot be used in the power standby mode when LOW POWER is selected.)
	“–” indicates a command which cannot be used in power standby mode.
*2:	PN-ZB01 (optional) limitations
	(A) When PN-ZB01 (optional) is not attached, (B) When PN-ZB01 (optional) is attached.

○ : The command can be used.

- : Error (ERR)

Power control/Input mode selection

Function	Command	Direction	Parameter		Reply	Control/Response contents	*1		*2
				(A)				(B)
POWER CONTROL	POWR	W		0		Switches to standby mode.
				1		Returns from standby mode.	●	○		○
		R			0	Standby mode
					1	Normal mode
					2	Input signal waiting mode
INPUT MODE SELECTION	INPS	W		0		Toggle change for input mode. Terminals not selected in INPUT SELECT		○		○
						cannot be selected.
				1		PC DVI-D		-		○
						“ERR” when AV DVI-D is selected for DVI of INPUT SELECT.
				2		PC D-SUB		○		○
				3		AV COMPONENT		-		○
						“ERR” when PC RGB is selected for BNC of INPUT SELECT.
				4		AV VIDEO	●	-		○
				6		PC RGB		-		○
						“ERR” when AV COMPONENT is selected for BNC of INPUT SELECT.
				7		AV DVI-D		-		○
						“ERR” when PC DVI-D is selected for DVI of INPUT SELECT.
				8		AV S-VIDEO		-		○
				9		AV HDMI		○		○
						“ERR” when PC HDMI is selected for HDMI of INPUT SELECT.
				10		PC HDMI		○		○
						“ERR” when AV HDMI is selected for HDMI of INPUT SELECT.
		R			1	PC DVI-D
					2	PC D-SUB
					3	AV COMPONENT
					4	AV VIDEO	●	○		○
					6	PC RGB
					7	AV DVI-D
					8	AV S-VIDEO
					9	AV HDMI
					10	PC HDMI

SCREEN menu

	Function		Command	Direction	Parameter	Reply	Control/Response contents	*1	*2
									(A) (B)
Auto			ASNC	W	1		When the input mode is PC D-SUB, PC RGB.
CLOCK			CLCK	WR	0-1200	0-1200	When the input mode is PC D-SUB, PC RGB.
							Varies depending on the signal.
PHASE			PHSE	WR	0-63	0-63	When the input mode is PC D-SUB, PC RGB.
positioning		Position of	HPOS	WR	0-100	0-100	0-800 on PC D-SUB, PC RGB.
		the longest					Varies depending on the signal.
		direction
		Position of	VPOS	WR	0-100	0-100	0-200 on PC D-SUB, PC RGB.
		the shortest					Varies depending on the signal.
		direction
size		Position of	HSIZ	WR	0-100	0-100		-	○ ○
		the longest
		direction
		Position of	VSIZ	WR	0-100	0-100
		the shortest
		direction
RESOLUTION		Longest	HRES	WR	300-1920	300-1920	When the input mode is PC D-SUB, PC RGB.
		direction					Only even numbers are valid for parameters.
		resolution					Varies depending on the signal.
		Shortest	VRES	WR	200-1200	200-1200
		direction
		resolution
RESET			ARST	W	1

E22