Sharp PN-V601 manual Controlling the Monitor with a PC LAN, Settings to connect to a LAN

Page 28

Controlling the Monitor with a PC (LAN)

When the PN-ZB02 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN.

You can also configure the monitor to send e-mail notification when it has a problem.

The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through).

Network (LAN)

LAN terminal

Hub

LAN cable (commercially available, straight)

TIPS

•You must assign an IP address to the monitor by following the procedures in “Settings to connect to a LAN”. (See the description on the right.)

•Your PC must be installed with Internet Explorer (version 6.0 or later).

•To control the monitor via LAN, set RS-232C/LAN SELECT to LAN. (See page 10.)

•You cannot use RS-232C and LAN control simultaneously.

Initializing personal information

•When the PN-ZB02 (optional) is attached, personal information such as e-mail addresses can be registered in the monitor. Before transferring or disposing of the monitor, initialize all settings by selecting ALL RESET 1. (See page 16.) Note that ALL RESET 2 will not initialize e-mail addresses and other settings.

Settings to connect to a LAN

Set the monitor’s IP address and subnet mask to match the settings of your LAN.

These settings can be made on either the monitor or a PC connected to the monitor.

The settings depend on the configuration of your LAN. Ask your LAN administrator for details.

■ To set on the monitor

Set RS-232C/LAN SELECT on the SETUP menu to LAN, and then set the LAN SETUP options. (See page 10.)

After setting each item, select SET and press MENU .

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to ON.

To set the address manually, set this to OFF.

IP ADDRESS

If the DHCP CLIENT is set to OFF, specify an IP address.

Press or to select items, and press or to change the values.

SUBNET MASK

If the DHCP CLIENT is set to OFF, specify the subnet mask.

Press or to select items, and press or to change the values.

DEFAULT GATEWAY

If the DHCP CLIENT is set to OFF, specify the default gateway.

If you are not using a gateway, specify “0.0.0.0”.

Press or to select items, and press or to change the values.

RESET

Resets the values of the LAN settings to the factory preset values.

Select ON and then press MENU .

E28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents PN-V601 Contents NFront view Part NamesNRear view Page Basic Operation MuteMenu DisplayBasic Operation NSwitching the screen size Wide Zoom NormalDot by Dot Cut offRemote Control Mode Press or , select the mode, then perform settingsThis Monitor only Specified MonitorMenu Items Displaying the menu screenNExample of operation NMenu screen displayNSCREEN Menu item detailsMenu Items NPICTURE NSETUP Menu Items NAUDIONOPTION 11 EMenu Items NPIP/PbyP Menu Items NMULTINDual screen display Menu Items NZOOM2 Special Setting Setting procedureSet using the Multi menu 13 EPower Menu Items NSCHEDULEDAY of the Week InputAdjustments for PC screen display NAutomatic adjustmentNScreen display for adjustment 15 EALL Reset Temperature AlertAdjustment Lock LEDCommunication procedure Controlling the Monitor with a PC RS-232C17 E PC connectionNCommunication interval NID numbers19 E Setting of the Gamma user data RS-232C command table Power control/Input mode selection21 E Controlling the Monitor with a PC RS-232CControlling the Monitor with a PC RS-232C Picture menu Audio menuControlling the Monitor with a PC RS-232C Setup menu 23 EControlling the Monitor with a PC RS-232C Option menu Image Position Epos setting 25 EControlling the Monitor with a PC RS-232C Multi menu Horizontal orientation Vertical orientationInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menu27 E Commands for setting of the Gamma user dataControlling the Monitor with a PC RS-232C Others Controlling the Monitor with a PC LAN Settings to connect to a LANTo set on the monitor This monitor is factory preset as shown below IP Address Default Gateway 0.029 E To set from a PCSee pages 31 to 35 for details on each setting Controlling with a PCBasic operation If the Dhcp Client is set to OFF, specify an IP address31 E User Name / Password DNS ServerAccept IP Address IP Address 1 to33 E Attach the log file to a TEMPERATURE/HARDWARE error e-mail Recipient E-MAIL AddressesCondition Confirmation35 E Troubleshooting Specifications NPN-V601 Product SpecificationsNPN-ZR01 optional Product Specifications 37 ESpecifications NDimensional Drawings NPower managementDmpm Digital Monitor Power Management NDDC plug and playSpecifications NCompatible signal timing PC 39 ESpecifications NCompatible signal timing AV 41 E PN-V601 Ge EN10H1
Related manuals
Manual 42 pages 29.49 Kb

PN-V601 specifications

The Sharp PN-V601 is a cutting-edge display solution that meets the demands of various professional environments. This 60-inch LCD monitor is designed for commercial use, offering a blend of remarkable performance, flexibility, and reliability.

One of the standout features of the PN-V601 is its superb display quality. With a Full HD resolution of 1920 x 1080 pixels, this monitor delivers vibrant colors and sharp images that are essential for presentations, digital signage, and collaborative workspaces. The display utilizes advanced LCD technology, which provides wide viewing angles up to 178 degrees both horizontally and vertically. This ensures that the content remains visible and engaging from various positions in a room.

The PN-V601 is engineered with a sleek and slim design, making it an aesthetically pleasing addition to any environment. Its thin bezels allow for seamless video wall configurations, enabling the creation of large-scale visual displays. When arranged in a multi-screen setup, the PN-V601 ensures minimal gaps between the screens, enhancing the overall viewing experience.

In terms of connectivity, the Sharp PN-V601 is equipped with a wide range of input options, including HDMI, DisplayPort, and DVI-D. This versatility allows for easy integration with external devices such as computers, media players, and video conferencing systems, ensuring that users can present or share information without hassle.

One of the key technologies integrated into the PN-V601 is the advanced image processing capabilities, which enhance image quality through features like fine-tuning of brightness and color correction. This technology ensures that every detail is vividly displayed, making it ideal for showcasing high-definition content.

Moreover, the PN-V601 has been designed for continuous operation, making it suitable for environments that require displays to run around the clock, such as retail displays and control rooms. The robust build quality ensures longevity and durability, reducing maintenance costs over time.

Another notable characteristic is its energy efficiency. The PN-V601 adheres to modern sustainability standards, minimizing power consumption while delivering outstanding performance. This makes it an environmentally friendly choice, aligning with corporate social responsibility initiatives.

Overall, the Sharp PN-V601 offers a powerful combination of elegance, functionality, and advanced technology, making it an exceptional choice for businesses looking to enhance their visual communication capabilities. Whether used for digital signage, presentations, or collaborative work, this display is engineered to impress.
Top Page Image Contents