Sharp PN-V601 29 E, To set from a PC, Controlling the Monitor with a PC LAN, Default Gateway 0.0

Page 29

■ To set from a PC

When the monitor is connected to a PC, LAN settings can be configured via PC.

Set up process

(1)Connect your monitor to a PC

(2)Specify the PC’s IP address

(3)Configure the monitor’s LAN settings

(1) Connecting your monitor to a PC

Connect a commercially available crossover LAN cable (UPT cable, Category 5) to the LAN port on the PC and this monitor.

LAN terminal

PC

To LAN terminal

LAN cable (commercially available, crossover)

(2) Specifying the PC’s IP address

To configure the monitor’s LAN settings, you must temporarily change the settings on the PC.

This explanation is based on Windows 7.

1.Log on to the PC with an administrator account.

2.Click [Start], and then click “Control Panel”.

3.Click “View network status and tasks” in “Network and Internet”.

In “Classic View”, click “Network and Sharing Center”.

4.Click “Local Area Connection” and then “Properties”.

5.Click “Internet Protocol Version 4 (TCP/IPv4)” and then “Properties”.

6.Make a note of the current IP address, subnet mask, and default gateway settings.

Make sure you write this information now as you will be changing the IP address, subnet mask, and default gateway settings back to these settings afterwards.

Controlling the Monitor with a PC (LAN)

7.Temporarily change the IP address and subnet mask.

To access the monitor as it is shipped from the factory, set as follows.

IP Address: 192.168.150.3

Subnet Mask: 255.255.255.0

Default Gateway: (leave blank)

8. Click [OK] and then reboot the PC.

TIPS

• This monitor is factory preset as shown below.

IP Address

: 192.168.150.2

Subnet Mask

: 255.255.255.0

Default Gateway

: 0.0.0.0

(3)Configuring the monitor’s LAN settings

Access the monitor using Internet Explorer.

Controlling the monitor

1.Turn the power ON to the monitor.

2.Set RS-232C/LAN SELECT on the SETUP menu to LAN.

PC operation

3.Launch Internet Explorer, in the “Address” box type “http://192.168.150.2/” and press the Enter key.

You will be prompted to enter a user name and password.

4.Leave the user name and password boxes blank and click [OK].

29 E

Image 29
Contents PN-V601 Contents NRear view Part NamesNFront view Page Mute Basic OperationMenu DisplayWide Zoom Normal Basic Operation NSwitching the screen sizeDot by Dot Cut offPress or , select the mode, then perform settings Remote Control ModeThis Monitor only Specified MonitorDisplaying the menu screen Menu ItemsNExample of operation NMenu screen displayMenu Items NPICTURE Menu item detailsNSCREEN Menu Items NAUDIO NSETUPMenu Items 11 ENOPTION NDual screen display Menu Items NMULTINPIP/PbyP Setting procedure Menu Items NZOOM2 Special SettingSet using the Multi menu 13 EMenu Items NSCHEDULE PowerDAY of the Week InputNAutomatic adjustment Adjustments for PC screen displayNScreen display for adjustment 15 ETemperature Alert ALL ResetAdjustment Lock LEDControlling the Monitor with a PC RS-232C Communication procedure17 E PC connectionNID numbers NCommunication interval19 E Setting of the Gamma user data Power control/Input mode selection RS-232C command table21 E Controlling the Monitor with a PC RS-232CAudio menu Controlling the Monitor with a PC RS-232C Picture menu23 E Controlling the Monitor with a PC RS-232C Setup menuControlling the Monitor with a PC RS-232C Option menu 25 E Image Position Epos settingControlling the Monitor with a PC RS-232C Multi menu Horizontal orientation Vertical orientationControlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C Others Commands for setting of the Gamma user data27 E To set on the monitor Settings to connect to a LANControlling the Monitor with a PC LAN Default Gateway 0.0 This monitor is factory preset as shown below IP Address29 E To set from a PCControlling with a PC See pages 31 to 35 for details on each settingBasic operation If the Dhcp Client is set to OFF, specify an IP address31 E DNS Server User Name / PasswordAccept IP Address IP Address 1 to33 E Recipient E-MAIL Addresses Attach the log file to a TEMPERATURE/HARDWARE error e-mailCondition Confirmation35 E Troubleshooting NPN-V601 Product Specifications SpecificationsNPN-ZR01 optional Product Specifications 37 ENPower management Specifications NDimensional DrawingsDmpm Digital Monitor Power Management NDDC plug and play39 E Specifications NCompatible signal timing PCSpecifications NCompatible signal timing AV 41 E PN-V601 Ge EN10H1
Related manuals
Manual 42 pages 29.49 Kb

PN-V601 specifications

The Sharp PN-V601 is a cutting-edge display solution that meets the demands of various professional environments. This 60-inch LCD monitor is designed for commercial use, offering a blend of remarkable performance, flexibility, and reliability.

One of the standout features of the PN-V601 is its superb display quality. With a Full HD resolution of 1920 x 1080 pixels, this monitor delivers vibrant colors and sharp images that are essential for presentations, digital signage, and collaborative workspaces. The display utilizes advanced LCD technology, which provides wide viewing angles up to 178 degrees both horizontally and vertically. This ensures that the content remains visible and engaging from various positions in a room.

The PN-V601 is engineered with a sleek and slim design, making it an aesthetically pleasing addition to any environment. Its thin bezels allow for seamless video wall configurations, enabling the creation of large-scale visual displays. When arranged in a multi-screen setup, the PN-V601 ensures minimal gaps between the screens, enhancing the overall viewing experience.

In terms of connectivity, the Sharp PN-V601 is equipped with a wide range of input options, including HDMI, DisplayPort, and DVI-D. This versatility allows for easy integration with external devices such as computers, media players, and video conferencing systems, ensuring that users can present or share information without hassle.

One of the key technologies integrated into the PN-V601 is the advanced image processing capabilities, which enhance image quality through features like fine-tuning of brightness and color correction. This technology ensures that every detail is vividly displayed, making it ideal for showcasing high-definition content.

Moreover, the PN-V601 has been designed for continuous operation, making it suitable for environments that require displays to run around the clock, such as retail displays and control rooms. The robust build quality ensures longevity and durability, reducing maintenance costs over time.

Another notable characteristic is its energy efficiency. The PN-V601 adheres to modern sustainability standards, minimizing power consumption while delivering outstanding performance. This makes it an environmentally friendly choice, aligning with corporate social responsibility initiatives.

Overall, the Sharp PN-V601 offers a powerful combination of elegance, functionality, and advanced technology, making it an exceptional choice for businesses looking to enhance their visual communication capabilities. Whether used for digital signage, presentations, or collaborative work, this display is engineered to impress.