Sharp PN-V601 manual Remote Control Mode, Press or , select the mode, then perform settings

Page 7

Remote Control Mode

With the remote control unit it’s possible to perform operation

of...

•The primary monitor

•Monitors with a specified ID No.

•All primary/secondary monitors

It’s necessary to specify which type of operation will be performed in advance.

1.If using the remote control unit, press MODE for approx 5 seconds.

If using the monitor buttons, hold both

and at

the same time on the primary.

 

REMOTE CONTROL MODE

 

 

 

 

▲ THIS MONITOR ONLY▲

 

MODE

 

Operate this monitor.

OK CANCEL

2. Press or , select the mode, then perform settings.

THIS MONITOR ONLY

Performs operation of only the primary using the remote control unit.

[Example] If the volume is lowered, the volume of the primary will lower.

Secondary

 

Primary

ID No.: 2

 

ID No.: 1

 

 

VOLUME 10

 

 

 

 

 

Secondary

 

Secondary

ID No.: 3

 

ID No.: 4

 

 

 

 

Press to lower the volume

SPECIFIED MONITOR

Performs operation of a monitor with a specified ID No. using the remote control unit.

Press or to select ID No., then press or to select the ID No. of the monitor that you will operate.

*When it receives signals from the remote control unit,

“Operating specified monitor.” will be displayed on the primary screen.

[Example.] If ID No. is set to 3 and the volume is lowered, the volume of the monitor for ID No.: 3 will lower.

 

Secondary

Primary

 

ID No.: 2

ID No.: 1

 

 

 

 

 

Secondary

Secondary

 

ID No.: 3

ID No.: 4

 

VOLUME 10

 

 

 

 

 

 

Press to lower the volume

When you would like to confirm the ID No. that is set to the

monitor, press or to select ID No. DISPLAY, then press . The ID No. will be displayed on the screen.

ALL MONITORS

Performs operation of all primary/secondary monitors.

*ALL will be displayed on the menu of the primary.

*When it receives signals from the remote control unit,

“Operating all monitors.” will be displayed on the secondary screen. (Excluding power and input mode selection operation)

*Settings may not be reflected depending on the state of the connected monitors.

[Example] If the power for the primary is turned ON, the power for all the monitors will be turned ON.

 

 

Secondary

Primary

 

 

 

ID No.: 2

ID No.: 1

 

 

 

Power ON

Power ON

 

 

 

Secondary

Secondary

 

 

 

ID No.: 3

ID No.: 4

 

 

 

Power ON

Power ON

 

 

 

Press POWER to turn the power ON

 

Press

or

to select EXPAND ITEM, and press

or

to select to perform this action or not.

OFF ...........For all monitors, only power, input mode

selection, and product information display operations will be recognized.

ON .............For all monitors, all operations will be

recognized.

After returning to the normal screen with procedure 3, when 5 minutes have passed from the end of operation, it will automatically return to OFF.

ALL [EXPAND ITEM] will be displayed on the menu of the primary.

*Even when REMOTE CONTROL MODE is set to ALL MONITORS, certain settings such as LAN settings and ID No. settings will not be reflected on the other monitors.

3.Press or to select OK, then press MENU and return to the normal screen.

4.Perform operation.

Caution

•When the remote control mode is set to ALL MONITORS and EXPAND ITEM is set to ON, performing remote control operations that change adjustment values will result in the secondary adjustment values being the same as the primary adjustment values.

Secondary

Primary

Secondary

Primary

ID No.: 2

ID No.: 1

ID No.: 2

ID No.: 1

VOLUME 12

VOLUME 11

VOLUME 10

VOLUME 10

Secondary

Secondary

Secondary

Secondary

ID No.: 3

ID No.: 4

ID No.: 3

ID No.: 4

VOLUME 9

VOLUME 10

VOLUME 10

VOLUME 10

Press to lower the volume

Be careful of this when adjusting individual displays.

TIPS

•You can copy the setting values of the primary to other monitors with COPY SETTING VALUE. (See page 11.)

•The buttons on the monitor itself (primary) are also effective in remote control mode.

•When monitors connected in a daisy chain are in standby mode for LOW POWER, operation cannot be performed for subsequent monitors.

7 E

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PN-V601 Contents NFront view Part NamesNRear view Page Display Basic OperationMute MenuCut off Basic Operation NSwitching the screen sizeWide Zoom Normal Dot by DotSpecified Monitor Remote Control ModePress or , select the mode, then perform settings This Monitor onlyNMenu screen display Menu ItemsDisplaying the menu screen NExample of operationNSCREEN Menu item detailsMenu Items NPICTURE Menu Items NAUDIO NSETUPNOPTION 11 EMenu Items NPIP/PbyP Menu Items NMULTINDual screen display 13 E Menu Items NZOOM2 Special SettingSetting procedure Set using the Multi menuInput PowerMenu Items NSCHEDULE DAY of the Week15 E Adjustments for PC screen displayNAutomatic adjustment NScreen display for adjustmentLED ALL ResetTemperature Alert Adjustment LockPC connection Communication procedureControlling the Monitor with a PC RS-232C 17 ENID numbers NCommunication interval19 E Setting of the Gamma user data Controlling the Monitor with a PC RS-232C RS-232C command tablePower control/Input mode selection 21 EAudio menu Controlling the Monitor with a PC RS-232C Picture menu23 E Controlling the Monitor with a PC RS-232C Setup menuControlling the Monitor with a PC RS-232C Option menu Horizontal orientation Vertical orientation Image Position Epos setting25 E Controlling the Monitor with a PC RS-232C Multi menuControlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menu27 E Commands for setting of the Gamma user dataControlling the Monitor with a PC RS-232C Others Controlling the Monitor with a PC LAN Settings to connect to a LANTo set on the monitor To set from a PC This monitor is factory preset as shown below IP AddressDefault Gateway 0.0 29 EIf the Dhcp Client is set to OFF, specify an IP address See pages 31 to 35 for details on each settingControlling with a PC Basic operation31 E IP Address 1 to User Name / PasswordDNS Server Accept IP Address33 E Confirmation Attach the log file to a TEMPERATURE/HARDWARE error e-mailRecipient E-MAIL Addresses Condition35 E Troubleshooting 37 E SpecificationsNPN-V601 Product Specifications NPN-ZR01 optional Product SpecificationsNDDC plug and play Specifications NDimensional DrawingsNPower management Dmpm Digital Monitor Power Management39 E Specifications NCompatible signal timing PCSpecifications NCompatible signal timing AV 41 E PN-V601 Ge EN10H1
Related manuals
Manual 42 pages 29.49 Kb

PN-V601 specifications

The Sharp PN-V601 is a cutting-edge display solution that meets the demands of various professional environments. This 60-inch LCD monitor is designed for commercial use, offering a blend of remarkable performance, flexibility, and reliability.

One of the standout features of the PN-V601 is its superb display quality. With a Full HD resolution of 1920 x 1080 pixels, this monitor delivers vibrant colors and sharp images that are essential for presentations, digital signage, and collaborative workspaces. The display utilizes advanced LCD technology, which provides wide viewing angles up to 178 degrees both horizontally and vertically. This ensures that the content remains visible and engaging from various positions in a room.

The PN-V601 is engineered with a sleek and slim design, making it an aesthetically pleasing addition to any environment. Its thin bezels allow for seamless video wall configurations, enabling the creation of large-scale visual displays. When arranged in a multi-screen setup, the PN-V601 ensures minimal gaps between the screens, enhancing the overall viewing experience.

In terms of connectivity, the Sharp PN-V601 is equipped with a wide range of input options, including HDMI, DisplayPort, and DVI-D. This versatility allows for easy integration with external devices such as computers, media players, and video conferencing systems, ensuring that users can present or share information without hassle.

One of the key technologies integrated into the PN-V601 is the advanced image processing capabilities, which enhance image quality through features like fine-tuning of brightness and color correction. This technology ensures that every detail is vividly displayed, making it ideal for showcasing high-definition content.

Moreover, the PN-V601 has been designed for continuous operation, making it suitable for environments that require displays to run around the clock, such as retail displays and control rooms. The robust build quality ensures longevity and durability, reducing maintenance costs over time.

Another notable characteristic is its energy efficiency. The PN-V601 adheres to modern sustainability standards, minimizing power consumption while delivering outstanding performance. This makes it an environmentally friendly choice, aligning with corporate social responsibility initiatives.

Overall, the Sharp PN-V601 offers a powerful combination of elegance, functionality, and advanced technology, making it an exceptional choice for businesses looking to enhance their visual communication capabilities. Whether used for digital signage, presentations, or collaborative work, this display is engineered to impress.
Top Page Image Contents