Sharp PN-V601 manual Recipient E-MAIL Addresses, Condition, Confirmation, Time

Page 34

Controlling the Monitor with a PC (LAN)

■ MAIL (RECIPIENT)

This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error.

RECIPIENT E-MAIL ADDRESSES

Specify the e-mail addresses to send error notification e-mail to.

CONDITION

Specify the conditions to send mails.

When you check PERIODICAL, specify the date and time to send the mails in the PERIODICAL setting.

CONFIRMATION

Sends test e-mail.

This allows you to confirm that the e-mail settings are configured properly.

Attach the log file to a TEMPERATURE/HARDWARE error e-mail

When this option is checked, a log is added to the mail which notifies a temperature or status error.

TIPS

•The RECIPIENT E-MAIL ADDRESSES can be up to 64 alphanumeric characters or symbols.

■ MAIL (PERIODICAL)

When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail.

DAY OF THE WEEK

Specify the day of the week to send the periodical mails.

TIME

Specify the time of the day to send the periodical mails.

Caution

•Do not turn off the main power when you set to send the periodical mails.

•Specify the correct date and time. (See page 11.)

If the date and time settings are incorrect, the periodical mail is not sent properly.

•Regularly confirm that the specified date and time is correct.

•When LOW POWER is selected for STANDBY MODE, periodical mails will not be sent in standby mode.

E34

Image 34

Contents PN-V601 Contents NFront view Part NamesNRear view Page Menu Basic OperationMute DisplayDot by Dot Basic Operation NSwitching the screen sizeWide Zoom Normal Cut offThis Monitor only Remote Control ModePress or , select the mode, then perform settings Specified MonitorNExample of operation Menu ItemsDisplaying the menu screen NMenu screen displayNSCREEN Menu item detailsMenu Items NPICTURE NSETUP Menu Items NAUDIONOPTION 11 EMenu Items NPIP/PbyP Menu Items NMULTINDual screen display Set using the Multi menu Menu Items NZOOM2 Special SettingSetting procedure 13 EDAY of the Week PowerMenu Items NSCHEDULE InputNScreen display for adjustment Adjustments for PC screen displayNAutomatic adjustment 15 EAdjustment Lock ALL ResetTemperature Alert LED17 E Communication procedureControlling the Monitor with a PC RS-232C PC connectionNCommunication interval NID numbers19 E Setting of the Gamma user data 21 E RS-232C command tablePower control/Input mode selection Controlling the Monitor with a PC RS-232CControlling the Monitor with a PC RS-232C Picture menu Audio menuControlling the Monitor with a PC RS-232C Setup menu 23 EControlling the Monitor with a PC RS-232C Option menu Controlling the Monitor with a PC RS-232C Multi menu Image Position Epos setting25 E Horizontal orientation Vertical orientationInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menu27 E Commands for setting of the Gamma user dataControlling the Monitor with a PC RS-232C Others Controlling the Monitor with a PC LAN Settings to connect to a LANTo set on the monitor 29 E This monitor is factory preset as shown below IP AddressDefault Gateway 0.0 To set from a PCBasic operation See pages 31 to 35 for details on each settingControlling with a PC If the Dhcp Client is set to OFF, specify an IP address 31 E Accept IP Address User Name / PasswordDNS Server IP Address 1 to33 E Condition Attach the log file to a TEMPERATURE/HARDWARE error e-mailRecipient E-MAIL Addresses Confirmation35 E Troubleshooting NPN-ZR01 optional Product Specifications SpecificationsNPN-V601 Product Specifications 37 EDmpm Digital Monitor Power Management Specifications NDimensional DrawingsNPower management NDDC plug and playSpecifications NCompatible signal timing PC 39 ESpecifications NCompatible signal timing AV 41 E PN-V601 Ge EN10H1

Related manuals

Manual 42 pages 29.49 Kb