Sharp PN-K321H NToppling prevention, NRemoving the attachment plate, Top of monitor

Page 32

Mounting Precautions

(For SHARP dealers and service engineers)

•When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.

•Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

•This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation.

This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure.

•To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the thickness of the mounting bracket.

•Do not use an impact driver.

•When moving the monitor, be sure to hold it with the unit bottom and the side of unit. Do not hold the LCD panel or corners. This may cause product damage, failure, or injury.

•Do not use any screw holes other than VESA holes for installation.

nToppling prevention

Caution

•To reduce the risk of injury and damage caused by the product toppling or falling in an earthquake or similar situation, take measures to prevent toppling and falling.

•If the wall or platform on which the monitor is installed is not sufficiently strong, the effectiveness of the toppling/ falling prevention measures will be severely compromised. Reinforce the wall or platform as needed.

The toppling/falling prevention measures are intended to reduce the risk of injury and damage in an earthquake, however, the effectiveness of the measures is not guaranteed in all earthquakes.

•Before implementing the toppling prevention measures, complete all connections.

Secure to wall or post

1.Attach a commercially available eye bolt (a bolt shaped to allow attachment of a string or cord) to the wall or post.

Verify that the eye bolt is attached firmly and does not come out.

•Top of monitor

nRemoving the attachment plate

Caution

•The attachment plate is only for use with the monitor.

Do not use with any other devices.

1.Spread a thick, soft cloth (blanket, etc.) that will prevent damage to the LCD panel on a stable flat surface where the entire monitor can be placed, and place the monitor with the LCD panel face down on the cloth.

2.Remove the screws (x4) that fasten the attachment plate, and remove the attachment plate.

Commercially available eye bolt (bolt shaped to allow attachment of a string or cord)

2.Run a commercially available cord of sufficient strength through the cable clamp attachments and the eye of the eye bolt on the wall or post to secure the monitor.

•Top of monitor

Commercially available cord

• Back of monitor

E32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents PN-K321H Information on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EUFor Customers in U.K GREEN-AND-YELLOWBlue BrownDear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationBack FrontContents Supplied ComponentsAttachment plate for stand Brightness adjustment button Part NamesNFront view NRear viewInstalling the stand supplied NAttaching the standAdjusting the angle Installing the stand supplied NHeight/angle adjustmentAdjusting the height Connecting Peripheral Equipment Connection with a PC or AV equipmentConnecting the Power Cord NStoring the cables Binding CablesNFastening the cables Turning Power On/Off Turning on the main powerTurning power on/off Power lamp status Status of the monitorBasic Operation Dot by Dot Basic Operation NSwitching the screen sizeWide Normal Menu Items Displaying the menu screenNExample of operation NMenu screen displayNPICTURE Menu item detailsMenu Items Menu Items NSETUP NMONITORMenu Items NOTHERS ALL Reset Adjustment LockTemperature Alert OSD DisplayCommunication procedure PC connection NCommand formatControlling the Monitor with a PC RS-232C Communication conditionsWhen a command has been executed correctly When a command has not been executedIf execution of the command is taking some time NCommunication intervalRS-232C command table Power controlSetup menu Controlling the Monitor with a PC RS-232CInitialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C Monitor menuOthers menu OthersTroubleshooting Vesa DDC2B SpecificationsNProduct Specifications Specifications NDimensional Drawings Unit inch mmSpecifications NCompatible signal timing PC NPower managementScreen resolution Vsync DisplayPort NDDC plug and playSpecifications NDisplayPort input terminal pins DisplayPort 20 pinNToppling prevention NRemoving the attachment plateTop of monitor Back of monitorPN-K321H Me EN13D3
Top Page Image Contents