Sharp PN-K321H RS-232C command table, Controlling the Monitor with a PC RS-232C, Power control

	Controlling the Monitor with a PC (RS-232C)
RS-232C command table
How to read the command table
Command:	Command field (See page 23.)
Direction:	W When the “Parameter” is set in the parameter field (See page 23.), the command functions as described
	under “Control/Response Contents”.
	R The returned value indicated under “Reply” can be obtained by setting “????” or “	?” in the
	parameter field. (See page 23.)
Parameter:	Parameter field (See page 23.)
Reply:	Response (Returned value)
*:	“●” indicates a command which can be used in power standby mode regardless of the STANDBY MODE setting.
	“○” indicates a command which cannot be used in power standby mode when STANDBY MODE is set to LOW POWER.
	“–” indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting.

Power control

Function	Command	Direction	Parameter		Reply	Control/Response contents
POWER CONTROL	POWR	W		0		Switches to standby mode.
				1		Returns from standby mode.
		R			0	Standby mode
					1	Normal mode
					2	Input signal waiting mode

*

●

PICTURE menu

	Function		Command	Direction	Parameter	Reply	Control/Response contents	*
BRIGHT			VLMP	WR	0-31	0-31
CONTRAST			CONT	WR	0-60	0-60
BLACK LEVEL			BLVL	WR	0-60	0-60		○
TINT			TINT	WR	0-60	0-60
COLORS			COLR	WR	0-60	0-60
SHARPNESS			SHRP	WR	0-24	0-24
COLOR	COLOR MODE		BMOD	WR	0	0	STD
ADJUSTMENT
					2	2	VIVID
					3	3	sRGB
	WHITE	THRU	CTMP	WR	0	0
	BALANCE	PRESET			1-18	1-18	From 1: approximately 3,000K to 15: approximately 10,000K(500K steps)
							16: approximately 5,600K, 17: approximately 9,300K,
							18: approximately 3,200K	○
		USER			99	99
		R-CONTRAST	CRTR	WR	0-256	0-256	“ERR” when CTMP is not set to 99.
		G-CONTRAST	CRTG	WR	0-256	0-256
		B-CONTRAST	CRTB	WR	0-256	0-256
		R-OFFSET	OFSR	WR	-127-127	-127-127
		G-OFFSET	OFSG	WR	-127-127	-127-127
		B-OFFSET	OFSB	WR	-127-127	-127-127
	COPY TO USER		CPTU	W	0		Copies a preset value to the user setting.	-
	GAMMA		GAMM	WR	0-2	0-2	0: 1.8, 1: 2.2, 2: 2.4	○
					5-6	5-6	5: 2.0, 6: STD
ADVANCED	RGB INPUT RANGE		PDPR	WR	0-2	0-2	0: AUTO, 1: FULL, 2: LIMITED	○
RESET			ARST	W	2			-

SETUP menu

Function	Command	Direction	Parameter	Reply		Control/Response contents
LANGUAGE	LANG	WR	14		14	ENGLISH
			1		1	DEUTSCH
			2		2	FRANÇAIS
			3		3	ITALIANO
			4		4	ESPAÑOL
			5		5	РУССКИЙ
			6		6
AUDIO SELECT	ASDI	WR	1-2		1-2	1: DisplayPort, 2: STEREO MINI
AUDIO INPUT LEVEL	AIVP	WR	0-1		0-1	0: 1.0Vrms, 1: 0.5Vrms
BAUD RATE	BAUD	WR	0-2		0-2	0: 9600bps, 1: 19200bps, 2: 38400bps
DisplayPort STREAM	DPST	WR	0-1		0-1	0: SST, 1: MST

*

○

○

○

○

-

25 E