Sharp PN-K321H operation manual Menu item details, Menu Items, Npicture

Page 19

Menu Items

Menu item details

nPICTURE

BRIGHT

Adjusts the backlight brightness.

CONTRAST

Adjusts the difference between the bright and dark portions of the image.

BLACK LEVEL

Adjusts the entire brightness of the video signals.

TINT

Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta.

COLORS

Adjusts the color intensity.

SHARPNESS

Adjusts the sharpness of the image. Some settings and images may cause vertical lines to appear in the center of the screen.

COLOR ADJUSTMENT

COLOR MODE

The color mode changes in the following order:

STD (Standard) → VIVID → sRGB → STD...

*sRGB is international standard of color representation specified by IEC (International Electrotechnical Commission). Color conversion is made in taking account of liquid crystal’s characteristics and represents color tone close to its original image.

WHITE BALANCE

THRU

Displays the input signal level as is.

PRESET

Selects the color temperature using PRESET.

USER

Used for adjusting R-/G-/B-CONTRAST and R-/G-/B-OFFSET respectively.

PRESET

Selects the color temperature when the WHITE BALANCE is set to PRESET.

The setting values are shown for reference. The color temperature of the screen varies over time. This function is not intended to keep the color temperature constant.

USER

Adjusts each item when the WHITE BALANCE is set to USER.

R-CONTRAST

Adjusts bright-toned red component.

G-CONTRAST

Adjusts bright-toned green component.

B-CONTRAST

Adjusts bright-toned blue component.

R-OFFSET

Adjusts dark-toned red component.

G-OFFSET

Adjusts dark-toned green component.

B-OFFSET

Adjusts dark-toned blue component.

COPY TO USER

Copies the value of white set for PRESET to the USER setting. Select “ON” and then press [MENU/ENTER] button.

(In the case other than white, color tone may differ from the PRESET.)

GAMMA

Selects the gamma.

ADVANCED

RGB INPUT RANGE

Sets the RGB input signal range. To set automatically, select AUTO. Use AUTO normally.

If the RGB input signal range cannot be set appropriately even when using AUTO, set according to the image. When the setting is different, images will be displayed with washed out blacks and compressed gradients.

RESET

Resets the values of the PICTURE menu items to the factory preset values.

Select “ON” and then press [MENU/ENTER] button.

19 E

Page 18 Page 20
Image 19
Page 18 Page 20
Contents PN-K321H Other Countries outside the EU Information on Disposal for Users private householdsInformation on Disposal for Business Users European UnionBrown For Customers in U.KGREEN-AND-YELLOW BlueDear Sharp Customer Safety Precautions Tips and Safety Instructions Front For the monitor in landscape orientationFor the monitor in portrait orientation BackSupplied Components ContentsNRear view Attachment plate for stand Brightness adjustment buttonPart Names NFront viewNAttaching the stand Installing the stand suppliedAdjusting the height Installing the stand supplied NHeight/angle adjustmentAdjusting the angle Connection with a PC or AV equipment Connecting Peripheral EquipmentConnecting the Power Cord NFastening the cables Binding CablesNStoring the cables Power lamp status Status of the monitor Turning Power On/OffTurning on the main power Turning power on/offBasic Operation Wide Normal Basic Operation NSwitching the screen sizeDot by Dot NMenu screen display Menu ItemsDisplaying the menu screen NExample of operationMenu Items Menu item detailsNPICTURE NMONITOR Menu Items NSETUPMenu Items NOTHERS OSD Display ALL ResetAdjustment Lock Temperature AlertCommunication conditions Communication procedure PC connectionNCommand format Controlling the Monitor with a PC RS-232CNCommunication interval When a command has been executed correctlyWhen a command has not been executed If execution of the command is taking some timeControlling the Monitor with a PC RS-232C RS-232C command tablePower control Setup menuOthers Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C Monitor menu Others menuTroubleshooting NProduct Specifications SpecificationsVesa DDC2B Unit inch mm Specifications NDimensional DrawingsNDDC plug and play Specifications NCompatible signal timing PCNPower management Screen resolution Vsync DisplayPortDisplayPort 20 pin Specifications NDisplayPort input terminal pinsBack of monitor NToppling preventionNRemoving the attachment plate Top of monitorPN-K321H Me EN13D3
Top Page Image Contents