Sharp PN-K321H operation manual NProduct Specifications, Vesa DDC2B

Specifications

nProduct Specifications

Model			PN-K321H
LCD component			32" Class [31-35/64 inch (80.1cm) diagonal] TFT LCD
Max. resolution		(pixels)	3840 x 2160
Max. colors			Approx. 1.07 billion colors
Pixel pitch			0.182 mm (H) × 0.182 mm (V)
Viewing angle			176° right/left/up/down (contrast ratio ≥ 10)
Screen active area		inch (mm)	27-31/64 x 15-15/32 (697.9 x 392.6)
Response speed			8 ms (Gray to Gray, avg.)
Plug and play			VESA DDC2B
Power management			VESA DisplayPort
Input terminals	PC		DisplayPort x 1
	Audio		3.5 mm mini stereo jack x 1
	Serial (RS-232C)		3.5 mm mini jack x 1
Output terminals	Audio		3.5 mm mini stereo jack x 1
Speaker output			2 W + 2 W
Power requirement			AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter)
Operating temperature			32°F to 104°F (0°C to 40°C)
Operating humidity			20% to 80% (no condensation)
Power consumption			93 W *2 (5.9 W / 5.8 W) (when using the supplied AC adapter)
(input signal waiting mode*1 / standby mode)
Dimensions (excluding protrusions)		inch (mm)	Approx. 29-17/32(W) x 1-25/64(D) x 17-3/8(H) (750 x 35 x 441)
			(monitor only)
			Approx. 29-17/32(W) x 10-3/32(D) x 19-17/64~24-31/32(H)
			(750 x 256 x 489~634) (monitor on supplied stand)
Weight		lbs. (kg)	Approx. 16.5 (7.5) (monitor only)
			Approx. 28.7 (13.0) (monitor on supplied stand)

*1 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 1.2 W

*2 When using the monitor in DC19.5 V : 87 W

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

E28