Using the Remote Control Unit

QUICK REFERENCE

If the remote control fails to operate LCD Monitor functions, replace the batteries in the remote control unit.

1Open the battery cover.

2Insert two R-6 (“AA” size) batteries (supplied with the product).

3Close the battery cover.

CAUTION

•• Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment.

Use manganese or alkaline batteries only.

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

•• Do not mix batteries of different types. Different types of batteries have different characteristics.

•• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

•• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you fnd any chemical leakage, wipe thoroughly with a cloth.

•• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

•• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

•• Never attempt to charge non-rechargeable batteries.

Use the remote control unit by pointing it towards the remote control sensor on the LCD Monitor. Objects between the remote control unit and the remote control sensor may prevent proper operation.

5 m

Remote control sensor

10º

10º 10º

10º

■■Cautions regarding the remote control unit

•• Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

•• Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.

•• The remote control unit may not work properly if the remote control sensor on the LCD Monitor is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the LCD Monitor, or operate the remote control unit closer to the remote control sensor.

The POWER indicator on the LCD Monitor should light BLUE indicating you have power to the LCD Monitor.

If the POWER indicator on the LCD Monitor still does not light up, press POWER on the remote control to turn the power on.