Sharp LB-1085 operation manual Power Control Menu, Setup Menu

Page 27

On-Screen Display Menu

Power Control Menu

Power control setting allows you to save energy.

Example

 

 

 

Power Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No Signal Off

[Disable]

 

 

 

No Operation Off

[Disable]

 

1

 

 

 

Press MENU to display the MENU screen, and

2

then press

/ to select “Power Control”.

Press

/

to select a “No Signal Off” or “No

3

Operation Off”, and then press ENTER.

Press

/

to select “Enable”, and then press

4

ENTER.

 

 

 

 

Press MENU to exit.

 

 

No Signal Off

When set to “Enable”, the power will automatically shut down if there is no signal for 15 minutes.

•• Five minutes before the power shuts down, the remaining time displays every minute.

•• “Disable” is the factory preset value.

•• You can view TV broadcasts on the LCD Monitor if you use external equipment such as a TV tuner. Be aware that the “No Signal Off” function may not work even when the TV program you are viewing fnishes.

No Operation Off

When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.

•• Five minutes before the power shuts down, the remaining time displays every minute.

•• “Disable” is the factory preset value.

Setup Menu

Example

Setup

EZ Setup

Input Skip

Position

Language[English]

Identification

Reset

1

Press MENU to display the MENU screen, and

2

then press

/

to select “Setup”.

Press

/

to select a specifc adjustment

3

item, and then press ENTER.

Press

/

(or

/ ) to select the desired

4

setting, and then press ENTER.

Press MENU to exit.

EZ Setup

This function allows you to change the preset values.

Language: Select from among 4 languages (English, German, French and Spanish).

Monitor Location: Select “Home” or “Store” for the location where you plan to install the LCD Monitor.

•• If you select “Home”, AV MODE is set to “STANDARD”.

•• If you select “Store”, AV MODE is set to “DYNAMIC (Fixed)”.

•• See “Initial Setup” on page 17 for setting each item.

Input Skip

This setting allows you to skip the HDMI or PC-IN Input (“Input 4”, “Input 5”, “Input 6” and “Input 7”) on the Input Selection operation.

Yes: Skips the input.

No: Does not skip input.

Input Label

Lets you set the input terminal displayed when using the INPUT SOURCE menu. Press

/ / / to select the new name for the input mode.

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents LB-1085 For Customers in U.K Sonninstraße 3, D-20097 HamburgImportant Information Important Information Trademarks European UnionOther Countries outside the EU Dear Sharp Customer Additional Safety InformationInstallation and Transportation fluorescent tubes in this product have a limited lifetime Supplied Accessories Installing the LCD Monitor onto a StandInstalling the LCD Monitor on a Wall Speaker Compatibility Connecting External SpeakersBefore turning on the LCD Monitor When transporting the LCD MonitorUsing the Remote Control Unit Contents Part Names LCD Monitor FrontLCD Monitor Rear/Side STANDARD, MOVIE, GAME, User Remote Control UnitWhen using S-VIDEO cable Input Connecting Audiovisual EquipmentWhen using composite cable Input 2 or When using component cable Input 1 orTo optical digital input of external audio devices Using Digital Audio OutputConnecting Hdmi Equipment When using DVI Cable InputWhen connecting to a PC with an Hdmi terminal Input 4, 5 or Connecting a PCPC Compatibility Chart When connecting to a PC with a DVI terminal InputMonitor Location Turning On/Off the PowerInitial Setup Language Language settingChanging Volume Sleep TimerDirect Button Operation Example When the input source is Input 1, 2 or 3 terminals Press Input again or press / to selectInput source For HD programs Press View ModeFor PC input mode You can select the screen sizeMenu Items For Input 1/2/3 ModeFor HDMI/DVI Mode On-Screen Display MenuUsing the remote control On-Screen Display Menu OperationMenu Operation Buttons OPC Setting Advanced Picture SettingPicture Menu Surround Audio MenuSetup Menu Power Control MenuReset Input Signal For Analog PC Input Mode OnlyAuto Sync. Adjustment For Analog PC Input Mode Only Fine Sync. AdjustmentOption Menu Troubleshooting Problem Possible SolutionAppendix RS-232C Port Specifications Specifications Obtaining source code Information on the Software License for This ProductSoftware composition Software developed by Sharp and open source softwarePage Unit mm Einheit mm Unité mm Unidad mm Блок мм Sharp Corporation
Top Page Image Contents