Sharp LB-1085 Using Digital Audio Output, Connecting Hdmi Equipment, When using DVI Cable Input

Preparation

When using DVI Cable (INPUT 7):

Blu-ray disc player/DVD player

DVI cable (commercially available)

Ø 3.5 mm stereo minijack cable (commercially available)

•• To enjoy 1080p display capability, connect your external equipment using a component or DVI cable and set the

equipment to 1080p output.

Using Digital Audio Output

It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. PCM audio outputs from the terminal.

To optical digital input of external audio devices

Optical fber cable (commercially available)

•• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI

connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.

Connecting HDMI Equipment

You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.

HDMI-certifed cable* (commercially available)

HDMI equipment

•• When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.

•• To enjoy 1080p display capability, connect your Blu-ray disc player or other external equipment using an HDMI- certifed cable and set the equipment to 1080p output.

** Use a commercially-available HDMI cable complying with HDMI standards. Using a non-standard cable will not function normally, resulting in video not being shown or sound not being produced.

** Set the player not to use the HDMI CEC function such as AQUOS LINK. Using the HDMI CEC function may cause malfunction.

15