System connections (continued)
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM loop aerial terminals. Position the AM loop aerial for optimum reception. Place the AM loop aerial
on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Speaker connection
Connect the black wire to the minus
Red 
Black
Preparation for Use
Note:
Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling > | < Attaching to the wall > |
Caution:
Use speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit.
Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may |
|
be injured. | Incorrect |
|
Wall Screws (not supplied)
10