Setting the clock
Basic Operation
PRESET
In this example, the clock is set for the
1In
2Press the CLOCK/TIMER button for more than 2 seconds.
3Within 10 seconds, press the PRESET (
or 
) button to set hour.
4Press the CLOCK/TIMER button again.
5Within 10 seconds, press the PRESET (
or 
) button to set minute.
6Press the CLOCK/TIMER button. The clock is set.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will appear for about 5 seconds.
Notes:
To reset the clock if the power fails or is unplugged, the unit must be in the
"0:00" or time will flash when the AC power supply is restored after a power failure or unplugging the unit or when reset button is pressed.
Readjust the clock as follows:
To readjust the clock:
Perform "Setting the clock" from beginning.
14