Epg, ECO mode, Using a Smartphone with the TV

EPG (Continued)

Viewing the reminder schedule list

1Press EPG.

2Press Y to display the reminder schedule list.

3Press a/b to display next or previous screen.

4Press RETURN or EPG to exit.

Cancelling the reminder timer setting

1Press EPG.

2Press Y to display the reminder schedule list.

3Press a/b to select a programme you want to cancel.

4Press R to delete a programme from reminder list.

5Press RETURN or EPG to exit.

Colour adjustment and still image

Allows you to adjust the colour tone of a still image.

1Press COLOUR ADJ. (FREEZE), the moving image will be captured and colour adjustment screen displays.

2Press a/b/c/d to adjust the colour to your desired setting.

Button

Description

ECO mode

This function enables you to reduce the backlight brightness in order to decrease the power consumption and increase the backlight life span as shown in the following table.

	Selected item	Description

	ECO 1	Reduces the backlight brightness.

	ECO 2	Reduces the backlight brightness more than
	ECO 2	“ECO 1”.
		“ECO 1”.

	ECO Off	Normal setting of backlight brightness.

ECO status will be displayed on the channel information window.

Using a Smartphone with the TV

This function enables you to connect the TV to a smartphone that supports Mobile High-Deﬁ nition Link (MHL) using an MHL-compatible cable.

To connect the TV to your MHL-compatible smartphone, be sure to use an MHL-compatible cable (commercially available).

•You can view pictures and video on a large screen.

•You can play back music ﬁ les.

a	White with greenish tone.

b	White with reddish tone.

MHL-compatible cable

NOTE

INPUT 3 terminal (Rear side)

c	White with bluish tone.

d	White with yellowish tone.

RReveal/hide the setting screen.

GSet adjustment to last user setting.

BClose the setting screen and unfreeze image.

ENTER

Save/exit setting.

NOTE

•The colour adjustment screen and still image will automatically goes out after 30 minutes.

•Freeze/Colour adjustment function does not work in USB Photo/ Movie playback. It works for HDMI, composite/component and VGA.

•An MHL-compatible portable device is required to use this function. Connect the device to the INPUT 3 terminal.

•This production incorporates MHL I.

HAuto power on

When an MHL-compatible device is connected to the TV, the TV turns on automatically.

•This function operates when “Link operation” is set to “On”. (See page 12.)

HAuto input selection

When an MHL-compatible device is connected while the TV is on, the input mode is selected automatically.

•This function operates when “Link operation” is set to “On”. (See page 12.)

HOperation using the remote control

The remote control of the TV can be used to operate a portable device.

•a/b/c/d, ENTER, 0 - 9, etc.

•The operations vary depending on the connected equipment and content being viewed.

•Colour (Red/Green/Yellow/Blue) may be available to control play/ pause/fast forward/back forward function.

•The illustration used throughout this manual are based on LC-32LE155X.