Part names
TV (Front)
Remote control sensor 
POWER indicator
Light off | Power off. |
Lighted (Red) | The TV is in standby mode. |
Lighted (Green) | The TV is on. |
TV (Rear)
|
| 1 | POWER (On/Off) button | |
|
| 2 | MENU button | |
| 14 | 3 | INPUT button | |
| 4 | Channel up (r)/down (s) buttons | ||
|
| 5 | Volume up (e)/down (f) buttons | |
|
| 6 | INPUT 1 (HDMI/ARC) / INPUT 2 | |
| 15 |
| (HDMI)* /INPUT 3 (HDMI/MHL) | |
|
| terminals | ||
|
| 7 | Antenna input terminal | |
|
| 8 | ||
|
| 9 | INPUT 4 terminals | |
|
| 10 | INPUT 5 terminals | |
6 |
| 11 | AUDIO OUT terminals | |
1 | 12 | DIGITAL AUDIO OUTPUT terminal | ||
| ||||
| 2 | 13 | INPUT 6 terminal* | |
| 14 | USB terminal | ||
7 | 3 | 15 | Headphone jack ( 3.5 mm) | |
| • The speakers do not output volume | |||
|
|
| ||
|
|
| when headphones are plugged in. | |
8 | 4 |
|
| |
|
|
| ||
9 |
|
|
|
5
13 12 | 11 | 10 |
*The INPUT 2 and INPUT 6 terminals can both use the same analogue audio input terminal. However, the proper item must be selected in the “Audio select” menu. (See page 14.)
•The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
•The illustration used throughout this manual are based on
Turning the TV on/off
Turning on/off the power
•To turn on the power
Press POWER on the TV. (After a few seconds, an image appears with sound.)
Standby mode
•To standby mode
If the TV is switched on, you can switch it to standby by pressing POWER on the remote control.
• To turn off the power | • Switching on from standby |
Switch it off by pressing POWER on the TV. | From standby, press POWER on the remote control. |
NOTE
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
•Minor power is consumed when the unit is in standby mode.
7