Attaching the stand
•Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1Confi rm the screws supplied with the TV.
Screws (m5)
(used in step 2 and 3)
2Insert and hook post guide into stand base slot holes. (1) Fix the post using short screw. (2)
3Insert the stand base to the stand post on the bottom of the TV. (3)
4Insert and tighten the 4 long screws into the 4 holes on the bottom of the stand base. (4)
NOTE
• To detach the stand, perform the steps in reverse order.
CAUTION
•Do not attach or detach the stand without holding it.
Doing so can cause the stand to fall, resulting in serious personal injuries as well as damage to the stand.
Soft cushion
3
4
Antenna connection
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
Standard DIN45325 plug
Antenna cable (commercially available)
To antenna terminal
Room antenna terminal (75-ohm type)
CAUTION
•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH
NOTE
•Place the TV close to the AC outlet, and keep the power plug within reach.
•The illustration used throughout this manual are based on
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from INPUT on the remote control unit or INPUT on the TV.
CAUTION
•To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box), PC or other external equipment.
•Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
4