Sharp LC-60LE360X operation manual Option menu, Input signal, Adjusting the PC image automatically

On-Screen Display Menu

Switching subtitle languages (DVB Subtitle)

HDMI+Analogue H Fine sync. (PC input mode only)

Each time you press [ on the remote control, the subtitle switches when the broadcast contains subtitle information.

Set “Hearing impaired” to “On”

(Hearing impaired) 1st language

Off • • • • • • • • 2nd language

Set “Hearing impaired” to “Off”

1st language 2nd language

Off • • • • (Hearing impaired)

NOTE

•This function is valid only if broadcaster is transmitting multilingual subtitles.

Time zone

This function enables you to select your local time zone.

1 Press MENU and the MENU screen displays.

2Press c/d to select “” (Setup).

3 Press a/b to select “Digital setup”, and then press ENTER.

4 Press a/b to select “Time zone”, and then press

ENTER.

5 Press c/d to select the desired time zone.

NOTE

•This function lets you select the right time zone in case the time displayed in the EPG does not match the local time of your area.

•Time zone differ depending on the selected country.

HIdentification

You can check the current version of the software on the screen.

HReset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

NOTE

•If you execute “Reset”, all the settings such as “Picture”, “Audio” and “Programme setup” will be reset to the factory preset values.

Option menu

HOutput volume select

Allows you to select what controls the audio output.

Selected item	Description
Fixed	• Sound via speakers is adjusted with
	VOLk/l on the remote control unit
	or the TV.
	• Sound via the AUDIO OUT terminal is
	not adjustable and constantly outputs.
Variable	• Sound via the AUDIO OUT terminal
	is adjusted with VOLk/l on the
	remote control unit or the TV.
	• Sound via speakers is muted.

NOTE

•When “Output volume select” is set to “Variable”, all Audio menu item cannot be adjusted.

HInput select

For setting the signal type of external equipment.

Input source	Selectable item
INPUT6	COMPONENT, VIDEO

HAudio select (HDMI input mode only)

You must select HDMI+Analogue if uses the AUDIO IN (R/L) jack for analogue audio input when using INPUT 5 (HDMI) terminal.

Option	Description
HDMI (Digital)	Select “HDMI (Digital)” if the Devices
	(DVD, Blu ray Player, Set Top Box or
	etc.) is connected using HDMI cable to
	INPUT 5 (HDMI) terminal.
HDMI+	Select “HDMI+Analogue” if the Devices
Analogue	(PC or etc.) is connected using DVI/
	HDMI convert cable to INPUT 5 (HDMI)
	terminal and AUDIO IN (R/L) jack is used
	to input Analogue Audio Signals.
HDMI (Digital)
	HDMI 5	5

DVD player/PC

	5
	8
AUDIO IN
HDMI 5	5

PC

HAuto volume

Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the advertisements. Auto volume solves this problem and equalises the volume levels. (On, Off)

HDigital audio output

This function allows you to select your favourite audio output system. (PCM, Auto, Off)

HSpeaker selection

You can choose to listen to the external amplifi er audio only. (On, Off)

NOTE

•This function only available when “Link operation” is set to “On”.

•You need to use CEC compatible amplifi er to control external speaker volume.

HAudio only

When listening to music from a music programme, you can set the display off and enjoy audio only.

Selected item	Description
On	Audio is output without screen image.
Off	Both screen images and audio are
	output.

NOTE

•When you make operations that change the picture on the TV such as by changing the input source, the “Audio only” function is set to “Off”.

HColour system

You can change the colour system to one that is compatible with the image on the screen. (Auto, PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)

NOTE

•If “Auto” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).

•“Colour system” is selectable only when inputting a composite signal.

Input signal

•Some input signals may have to be registered manually to display properly.

•The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.

1280 g 768 1360 g 768

Adjusting the PC image automatically

Auto sync.

This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available RGB cable, etc.

NOTE

•Auto sync. is likely to succeed when an input PC image has wide vertical stripes (e.g. pattern with high contrast stripes, or cross-hatched).

It may fail when an input PC image is solid (low contrast).

Adjusting the PC image manually

Ordinarily you can easily adjust the picture as necessary to change image position using Auto sync. In some cases, however, manual adjustment is needed to optimise the image.

Selected item	Description
H-Position	Centres the image by moving it to the left
	or right.
V-Position	Centres the image by moving it up or
	down.
Clock	Adjusts when the image fl ickers with
	vertical stripes.
Phase	Adjusts when characters have low
	contrast or when the image fl ickers.

NOTE

•For resetting all “Fine sync.” items to the factory preset values, press a/b to select “Reset”, press ENTER, press a/b to select “Yes”, and then press ENTER.

•Images may not be displayed properly depending on the settings and/or input signals.

HDivX (R) VOD

Please see USB Media Player on page 15.

- 9