Sharp LC-60LE360X On-Screen Display Menu, Programme setup, Selecting a preset AV mode

Watching TV

Programme setup		H Manual adjust		H Programme edit
		You can set some channel items manually.		Use this menu to set up a channel individually.
		1 Repeat steps 1 to 3 in Auto search.		1 Repeat steps 1 to 3 in Auto search.
Digital setting
You can reconfi gure DTV services settings		2 Press a/b to select “Manual adjust”, and then		2 Press a/b to select “Programme edit”, and then
		press ENTER.		press ENTER.
automatically or manually.
		3 Press a/b to select your desired item, and then		3 Press a/b to select the channel you want to
1 Press MENU and the MENU screen displays.
		press c/d to adjust the settings.		edit, and then press 1 to 5 on the remote control
2 Press c/d to select “
	” (Programme setup).			if necessary or press RETURN to exit.
3 Press a/b to select “Digital setting”, and		Item	Description	• As you toggle down the channels, each channel is
				immediately refl ected in the background when you press
		Storage to	Save programme to your desired
				ENTER.
then press ENTER. If you have already set the		[1~99]	channel number. Press R to save.
				1		(Erase programme)
password, enter it here.
		Sound system	Select the optimum sound system
• See page 7 for setting a password.				Channels can be erased individually.
			(Broadcasting system) to receive.
4 Press a/b to select the desired menu item, and				Press 1 to erase the selected channel.
			(B/G, D/K, I, M)
then press ENTER.				2			(Label)
		Colour system	Select the optimum colour system to
H Auto search			receive. (PAL, SECAM, NTSC)	You can change channel names individually.
				Maximum 5 alphanumerics can be input.
		Current CH	Select the channel you want to edit.
Use this menu to add new services automatically				Press 2 to start labelling.
			• Selected channel will be automatically
after auto installation has been completed.			refl ected in the background.	Press a/b/c/d to select a character, and
				then press 2 again or ENTER to save.
NOTE		Search	Start searching from current channel.
				3		(Sort)
• A region or service selection screen may display depending			• Instead of pressing c/d to adjust the
			frequency, you can set by directly entering	Channel positions can be sorted freely.
on the country settings or cable providers selections. Follow
			the frequency number of the channel with
the screen prompts to make the selections.			0 — 9.	Press 3 to select the channel you want to move.
H Manual search			Press R to save.	Press a/b to move it to the desired position,
		Fine-tune	Tune the frequency of the stored	and then press 3 again or ENTER to save.
Add new services within a specifi ed frequency band.
			channel to your desired position.	4			(Skip)
• Press c/d to select the frequency and then press ENTER.			• Adjust while checking the background
				Channels with “Skip” set to “On” are passed
			picture as a reference.
				over when using CHr/s even if selected
			Press R to save.
Analogue setting				while watching the image from the TV.
You can reconfi gure the TV channel settings		NOTE		Press 4 to skip the selected channel.
		• The frequency shown below the On-Screen Display shows		Press 4 again to cancel the skip.
automatically or manually using Auto search,
		the real-time frequency of the displayed channel.		5	(Lock)
Manual adjust or Programme edit.
H Auto search				You can block the viewing of any selected
				channel.
You can also automatically search by performing				Password must be set fi rst to allow “ ” to
the procedure below. This is the same function as				function.
programme auto search in auto installation.				• See page 7 for setting a password.
1 Press MENU and the MENU screen displays.				Press 5 to lock the selected channel.
				Press 5 again to unlock the locked channel.
2 Press c/d to select “	” (Programme setup).
3 Press a/b to select “Analogue setting”, and
then press ENTER. If you have already set the

password, enter it here.

• See page 7 for setting a password.

4 Press a/b to select “Auto search”, and then press ENTER.

You do not need to do anything during the auto search. Press MENU to exit.

On-Screen Display Menu

Selecting a preset AV mode

“AV mode” gives you several viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of programme watched or the type of image input from external equipment.

1 Press MENU and the MENU screen displays.

2 Press c/d to select “” (Picture) and “ ” (Audio).

3 Press a/b to select “AV mode”, and then press

ENTER.

Selected item	Description
STANDARD	For a highly defi ned image in a normally
	bright room.
MOVIE	For a movie.
PC	For PC (Available only when inputting
	an HDMI or PC signal).
DYNAMIC	For a clear-cut image emphasising high
	contrast for sports viewing.
DYNAMIC	Changes the image and sound settings
(FIXED)	to the factory preset values. No
	adjustments are allowed.

NOTE

•You can select a different AV mode item for each input mode. (For example, select STANDARD for TV input and DYNAMIC for VIDEO input.)

Menu operation

1 Press MENU and the MENU screen displays.

2 Press c/d to select the desired menu. (Programme setup, Picture, Audio, ECO, Setup, Option)

3 Press a/b to select the desired menu item. Press ENTER to proceed if necessary.

4 Press a/b or c/d to select the desired item or adjust the item to the desired level. Press ENTER if necessary.

5 Press RETURN as necessary to return to the previous MENU. Press MENU to exit the MENU.

- 6