Programme Edit, Delete, Label, Move, Skip

• See page 11 for setting a password.

4 The “DTV Manual Tuning” screen will appear, and then press ENTER.

• You do not need to do anything during the auto search.

If you have already set the password, enter it here.

2 Press a/b to select “DTV Manual Tuning”, and then press ENTER.

Repeat steps 1 and 2 in Auto Tuning.

CHANNEL menu (Continued)

H ATV Manual Tuning

You can set some channel items manually.

1 Repeat steps 1 and 2 in Auto Tuning.

2 Press a/b to select “ATV Manual Tuning”, and then press ENTER.

3 If you have already set the password, enter it here.

• See page 11 for setting a password.

4 Press a/b to select your desired item, and then press c/d to adjust the settings.

Current CH

Select the channel you want to edit.

• Selected channel will be automatically reﬂ ected in the background.

Colour System

Select the optimum colour system to receive. (PAL, SECAM, NTSC3.58, NTSC4.43, PAL60).

Sound System

Select the optimum sound system (Broadcasting system) to receive. (BG, DK, I, M).

Fine-Tune

Start searching from current channel.

• Instead of pressing c/d to adjust the frequency, you can set by directly entering the frequency number of the channel with 0 — 9.

Tune the frequency of the stored channel to your desired position.

• Adjust while checking the background picture as a reference.

NOTE

• The frequency shown below the On-Screen Display shows the real-time frequency of the displayed channel.

H DTV Manual Tuning

You can also automatically search by performing the procedure below.

H Programme Edit

Use this menu to set up a channel individually.

1Repeat steps 1 and 2 in Auto Tuning.

2Press a/b to select “Programme Edit”, and then press ENTER.

3If you have already set the password, enter it here.

• See page 11 for setting a password.

4Press a/b to select the channel you want to edit, and then press R, G, Y, B on the remote control if necessary or press RETURN to MENU screen.

Delete

Channels can be erased individually.

Press R to erase the selected channel.

Label

To enter the name of the channel. Maximum 5 alphanumeric can be input. Press G to start labelling.

•Press a/b: To select a desired alphanumeric.

•Press c/d: To move to the desired alphanumeric position.

Press ENTER to save.

Move

Channel positions can be moved freely.

Press Y to select the channel you want to move. Press a/b to move it to the desired position, and then press Y again or ENTER to save.

Skip

Channels with “Skip” set to “On” are passed over when using CHr/s even if selected while watching the image from the TV.

Press B to skip the selected channel.

Press B again to cancel the skip.

H Signal Information

If you install a DVB-T antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen.

1Repeat steps 1 and 2 in Auto Tuning.

2Press a/b to select “Signal Information”, and then press ENTER.

• The “Signal Information” screen will appear.

H Software Update (OAD)

•This function is for automatically download the data for the version update software over digital broadcasts when the “Software Update (OAD)” is set to “On”.

•To download, follow the instructions when the download message appears during a digital broadcast.

CAUTION

•Do not disconnect the AC cord when the software upgrade is in progress, as this may cause the upgrade to fail. If problem arises ask a qualiﬁed service personnel before the software upgrade period expires.