SETUP menu (Continued)
H Subtitle Languages
You can display subtitles for the hearing impaired in the Teletext broadcast if the subtitle languages are available.
1Press MENU and the MENU screen displays.
2Press c/d to select “
” (SETUP).
3Press a/b to select “Subtitle Languages”, and then press ENTER.
4Press c/d to select “Primary” or “Secondary”.
5Press a/b/c/d to select the desired language, and then press ENTER.
NOTE
•If subtitles for the selected language are not included in a received broadcast, subtitles will not be shown for that language.
H Hearing Impaired (DVB Subtitle)
Press [ to display the subtitle, and then press a/b to select the subtitle languages.
Set “Hearing Impaired” to “On”
(Hearing impaired) 
Primary
Off • • • • • • • • 
Secondary Set “Hearing Impaired” to “Off”
Primary 
Secondary
Off • • • • 
(Hearing impaired) 
NOTE
•This function is valid only if broadcaster is transmitting multilingual subtitles.
HWide Mode
You can manually select the size of a picture appeared on your screen.
Selectable picture size varies with the type of signal received.
Press a/b while the wide mode menu displays on the screen.
•As you toggle down the options, each mode is immediately refl ected on the TV.
Selected item | Description |
|
|
Auto | Keeps the original aspect ratio and |
| enlarges the picture as much as possible. |
|
|
4:3 | For 4:3 “standard” pictures. A side bar |
| appears on each side. |
|
|
16:9 | For 16:9 squeeze pictures. |
|
|
Zoom1 | Normal image size will be slightly |
| enlarged. |
|
|
Zoom2 | Further enlarge the Zoom1 image size. |
|
|
Just Scan | Display with Just Scan image. Noise may |
| appear on the edge of the screen with |
| some programmes. |
|
|
HHDMI Audio Select (HDMI input mode only) You must select Analogue if uses the AUDIO IN (R/L) jack for analogue audio input when using INPUT 1 (HDMI) terminal.
Option | Description |
|
|
Digital | Select “Digital” if the Devices (DVD, |
| Blu ray Player, Set Top Box or etc) is |
| connected using HDMI cable to INPUT 1 |
| (HDMI) terminal. |
|
|
Analogue | Select “Analogue” if the Devices (PC |
| or etc) is connected using DVI/HDMI |
| convert cable to INPUT 1 (HDMI) terminal |
| and AUDIO IN (R/L) jack is used to input |
| Analogue Audio Signals. |
|
|
Digital
INPUT 1
1
DVD player
Analogue
INPUT 1
1
AUDIO IN
(R/L)
PC
13