Sharp LC-32LE345X Screen menu PC input mode only, Adjusting the PC image automatically

• See page 11 for setting a password.

5 The language screen appears, and then press ENTER.

6 Press c/d to select “Home” or “Store”, and then press ENTER.

• The confi rmation screen appears only when selecting “Store”.

Press c/d to select “Yes” or “No”.

7 Press a/b to select your country channels listed on the screen, and then press ENTER.

• Auto installation will be executed.

• You do not need to do anything during the auto search.

H Reset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

NOTE

• If you execute “Reset”, all the settings such as “PICTURE”, “SOUND” and “SETUP” will be reset to the factory preset values.

14

SETUP menu (Continued)

HDivX ( R ) VOD

Please see USB Media Player on page 23.

HDemo

When “Demo” is set to “On”, after all the settings are completed, the Demo screen is displayed if there is no operation for several minutes. (On, Off)

HIdentification

You can check the current version of the software on the screen.

HSoftware Update (USB)

This function allows you to update the TV to the latest software using a USB device. You must update the software through the USB terminal.

H First Time Installation

You can set initial auto installation manually.

1Press MENU and the MENU screen displays.

2Press c/d to select “” (SETUP).

3Press a/b to select “First Time Installation”, and then press ENTER.

4If you have already set the password, enter it here.

SCREEN menu (PC input mode only)

Adjusting the PC image automatically

Auto Adjust

This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available RGB cable, etc.

NOTE

•Auto Adjust is likely to succeed when an input PC image has wide vertical stripes (e.g. pattern with high contrast stripes, or cross-hatched).

It may fail when an input PC image is solid (low contrast).

Adjusting the PC image manually

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Adjust. In some cases, however, manual adjustment is needed to optimise the image.

Selected item	Description
H-Offset	Centres the image by moving it to the left
	or right.
V-Offset	Centres the image by moving it up or
	down.
Size	Adjusts the image size to shrink or
	expand.
Phase	Adjusts when characters have low
	contrast or when the image fl ickers.
Position	Reset all adjustment item to factory preset
Reset	values.