Sanyo va-sw3050 instruction manual Operating the Camera, Camera Controller Functions

Page 18

Operating the Camera

The VA-SW3050 allows you to operate the camera remotely from PC using the camera controller on the screen.

1Click on the video from the camera you want to operate.

A red frame appears around the selected video.

2Click in the tool bar. Displays the camera controller.

5

1

2

3

4

Camera Controller Functions

If the camera is not equipped with panning-tilting functions, certain buttons do not work (only the shaded buttons are usable).

1Control buttons

Changes the camera orientation horizontally and vertically.

Changes the camera orientation diagonally.

Scans the monitored area end to end vertically or horizontally, and stops at the current camera position.

Starts or stops the sequence, auto-panning or tour action mode, respectively.

• The tour action mode is not available for some models.

Displays the configuration menu for the camera.

2Preset position buttons

Applies the registered configuration for camera orientation, zoom status and focusing position.

•Select the number for registered configuration from the pull-down menu and click [GO].

Registers the current camera orientation along with the zoom and focus positions as the preset configuration.

•Select the number to be used for preset configuration from the pull-down menu and click [Memory].

English

17

Image 18

Contents VA-SW3050 Table of Contents Features IntroductionSystem Requirements Welcome to the VA-SW3050 Setup Wizard dialog, click Next Installing the VA-SW3050 SoftwareSet the supplied installation CD-ROM into the drive Setup wizard for the VA-SW3050 startsInstalling the .NET Framework Components To Uninstall the VA-SW3050 SoftwarePC Time Setting Starting and Logging in to the VA-SW3050 Software VA-SW3050 starts and the login screen appearsUser ID admin Password admin Double-click the shortcut icon on the desktopOpening the Screen Logging OffClosing the Screen Exiting from the SoftwareRegistering the Camera with the Software Edit IP Address dialog appears Using the Camera Search FunctionClick Search Camera Enter new IP addressClick View Camera To update the displayed image, click ReloadSpecifying the Camera Title This closes the windowWhen registering cameras on two or more PCs Setting Options RateResolution QualityBasic Operations in the Main Screen Selecting the Camera to Operate Using the Context Menu Information Displayed in the Monitor SectionBasic Operations in the Main Screen Menu Bar Functions and Operating PrivilegesStops recording for all cameras Tool Bar Functions Lock button Indicator for available hard disk spaceAdjusting the Camera Orientation Changing the camera orientation and zooming-outOperating the Camera Camera Controller FunctionsConfiguration menu Example Changing the Camera ConfigurationON/OFF buttons for extended settings AUX Shooting function buttonsRecording Live Video About Live Video RecordingRecording Video Manually Recording by Specifying the Camera to Record the Live VideoRecording Live Videos from All Cameras Simultaneously Setting the Timer Recording Select Timer Setting from Options in the menu barClick Apply Setting the Timer Recording for Longer than 24 Hours Setting the Timer Recording Across MidnightSetting the Timer Recording for 24 Hours Setting HolidaysSetting the Alarm Recording When Recording on the PC’s Hard Disk Drive DirectlyWhen Recording on the Camera’s Memory Temporarily Specify the video options in alarm recording Rate When recording on the camera’s memory temporarilyOther Buttons in the Alarm Setting Screen Click a or B in the controller Operate the playback using the controllerPlaying Recorded Video To stop playbackTime Scale Panel Click Save Image Printing and Saving Video ImagesPrinting Video Images Saving Video Images Save As dialog appearsVideo Search Search Procedure Using the Date and Time DialogPlaying All the Videos Found Search Simultaneously Zooming in on Search ResultsPlaying Video from Search Results Playing the Specified Video in Single ScreenBrowse For Folder dialog appears Saving Video Found in the SearchClick Copy Select the folder to save the video and click OKFrame rate Viewing the Saved Video Using the Image ViewerImage display preferences Resolution Image NoChecking Alarm Status Alarm Button FunctionsAlarm Dialog Functions Restoring the Backup Data Backing up Recorded DataBacking Up Recorded Data Enter the password User RegistrationRegistering a New User Enter the current password Click OK Changing the User PasswordChange Password dialog appears Dialog confirming the password change appearsUser ID is highlighted in the User ID list Deleting a Registered UserClick the user you want to delete from the User ID list Click DeleteSetting the User Privileges for Operating the Camera Operation ButtonsSplit Screen Layout Changing Video Layout on the 16-part Split Screen Setting the Video Layout Pattern on the 4-part Split ScreenSaves the layout settings and the main screen appears Set the Quad Type with the radio button Quad TYPE1Overwrites the oldest video data to continue recording Configuring the Options for Storing Videos on HDDSet the hard disk space for recording Rec Stop Stops recordingDelete All the Recorded Data Deleting Recorded DataSelect the delete option Delete the Recorded Data by Specifying the PeriodThis is a camera setting Configuring Other OptionsProxy Setting Clock Setting NTP ServerDisplay Setting Start Up Setting Buzzer SettingPopup Setting When the alarm is detected AlarmAppendix Reference Table for Alarm Recording TimeRecording options for alarm recording Alarm area Max 8MB TV format Quality Video data size Frame rateSetting Preference Chart Disabled\Program Files\SANYO\VA-SW3050 Copyright notice Printed on recycled paper 1AC6P1P3061 L9EBB/WA 0406KP-SY