Configuring Other Options
You can configure the following options in relation to using the
Select [Others] from the [Options] in the menu bar and click a menu command to open the corresponding screen.
After completing the settings in the screen, click [Apply] and then click [OK].
■ [Proxy] Setting | ■ [Clock] Setting |
When you select the [Proxy] check box in the [Camera Setting] screen, you need to specify the server information (see page 7).
The
1
2
1IP address for the proxy server, and port number used for connecting to the proxy server
2User name and password used for authentication at the proxy server
•When user name and its password are required to use the proxy server, select the [Enable] check box and enter a valid user name and password in the appropriate boxes.
•For the valid user name and password, consult your network administrator.
1
2
3
1NTP Server
When using the automatic clock adjustment function, enter the domain name or IP address of the NTP server.
2PC
This is a PC setting.
When the check box is selected, date and time information is retrieved from the NTP server and the PC internal clock is automatically adjusted at the following intervals:
•When setting this function
•When starting up this software
•At
3Camera
This is a camera setting.
When the check box is selected, date and time information is retrieved from the PC internal clock and the camera’s internal clock is automatically adjusted at the following intervals:
•When setting this function
•When starting up this software
•At
MEMO:
When starting up the software and acquiring video images for the first time, if the time is not set on the camera side, date and time information is retrieved from the PC internal clock and automatically configured to the camera’s internal clock.
English | 43 |