3-14-3. STP Port Configuration
Function name:
STP Port Setting
Function description:
In the STP Port Setting, one item selection and five parameters settings are offered for user’s setup. User can disable and enable each port by selecting each Port Status item. User also can set “Path Cost” and “Priority” of each port by filling in the desired value and set “Admin Edge Port” and “Admin Point To Point” by selecting the desired item.
Fig.
Parameter description:
Port Status:
It displays the current state of a port. We cannot manually set it because it displays the status only. There are three possible states. ( according to 802.1w specification)
DISCARDING state indicates that this port can neither forward packets nor contribute learning knowledge.
Notice: Three other states (Disable state, BLOCKING state and LISTENING state) defined in the 802.1d specification are now all represented as DISCARDING state.
LEARNING state indicates this port can now contribute its learning knowledge but cannot forward packets still.
FORWARDING state indicates this port can both contribute its learning knowledge and forward packets normally.
Path Cost Status:
It is the contribution value of the path through this port to Root Bridge. STP algorithm determines a best path to Root Bridge by calculating the sum of path cost contributed by all ports on this path. A port with a smaller path cost value would become the Root Port more possibly.
105 | Publication date: Sep, 2009 | |
Revision A8 | ||
|