To enable or disable the DHCP Relay function on the Switch, Default is

“Disable”.

DHCP Relay Lifetime:

Use to set the default lifetime for which a prefix delegated by this DHCP local server is valid. This default is overridden by an interface-specific lifetime. Default is “5” sec.

DHCP Relay Agent Information Option 82 state:

Enables the system to insert the DHCP relay agent information option 82 in forwarded BOOT REQUEST messages to a DHCP server.

Default is “Disable” sec.

DHCP Relay Agent Information Option 82 Policy:

A DHCP relay agent may receive a message from another DHCP relay agent that already contains relay information. If this behavior is not suitable for your network, you can use the command “Replace, keep , Drop” to change it.

Default is “Keep” sec.

Server Port:

To evoke which port will enable the DHCP Relay Agent service.

Server IP:

To set the DHCP Server IP address.

47

Publication date: March., 2011

 

Revision A1

Page 59
Image 59
ICP DAS USA MSM-6226 Disable Dhcp Relay Lifetime, Dhcp Relay Agent Information Option 82 state, Server Port, Server IP