autologout
autologout
Syntax:
autologout <time>
Description:
To set up the timer of autologout.
Argument:
<time>: range 1 to 3600 seconds, 0 for autologout off, current setting is 180
seconds.
Possible value:
< time >: 0,1-3600
Example:
FEL2P-SW26 # autologout 3600
Set autologout time to 3600 seconds
bandwidth
set egress
Syntax:
set egress <range> < rate>
Description:
To set up the egress-rate of the ports.
Argument:
<range>:syntax 1,5-7, available from 1 to 26
< rate>: 64-1024000(Kb).
port 1-24: 64-102400(Kb); port 25-26: 64-1024000(Kb)
Possible value:
<range>: 1 to 26
<rate>: 64-102400(Kb) for port 1-24; 64-1024000(Kb) for port 25-26
Example:
FEL2P-SW26(bandwidth)# set egress 8-12 3780
FEL2P-SW26(bandwidth)# show
Port Ingress Rate(Kb) Egress Rate(Kb) Storm Type Storm Rate(Kb)
snmp mode
stp
====== ================== ================= ============ ================
Enter into system mode
1 102400 102400 DISABLE 102400
2 102400 102400 DISABLE 102400
3 102400 102400 DISABLE 102400
4 102400 102400 DISABLE 102400
5 102400 102400 DISABLE 102400
6 102400 102400 DISABLE 102400
7 102400 102400 DISABLE 102400
8 102400 3776 DISABLE 102400
9 102400 3776 DISABLE 102400
10 102400 3776 DISABLE 102400