
Member:
This is used to enable or disable if a port is a member of the new added VLAN, “Enable” means it is a member of the VLAN. Just tick the check box beside the port x to enable it.
Utag:
This is used to enable or disable if a port is a utag member of the new added VLAN, “Enable” means it is a utag member of the VLAN. Just tick the check box beside the port x to enable it.
Action:
The mode here means the type of participant. There are two modes, Active and NotInService, provided for the user’s choice.
Active:
It is Active Participant. In this mode, the switch participates active in GARP protocol exchanges. The default setting is Active.
NotInService:
It is NotInService. In this mode, the switch does not send or reply any GARP messages. It just listens messages and reacts for the received GVRP BPDU.
Fig.
Delete Group:
Just press the <Delete> button to remove the selected group entry from the
Edit a group:
Just select a group entry and press the <Edit> button, then you can modify a group’s description, member and untag settings.
83 | Publication date: March., 2011 |
| Revision A1 |