3-18. Alarm Configuration

Alarm Configuration

Events Configuration

Emai Configuration

Function name:

Events Configuration

Function description:

The Trap Events Configuration function is used to enable the switch to send out the trap information while pre-defined trap events occurred. The switch offers 21 different trap events to users for switch management. The trap information can be sent out in tow ways, including email and trap. The message will be sent while users tick (￿) the trap event individually on the web page shown as below.

Fig. 3-55

Parameter description:

Trap: Cold Start, Warm Start, Link Down, Link Up, Authentication Failure, User login, User logout

STP: STP Topology Changed, STP Disabled, STP Enabled

LACP: LACP Disabled, LACP Enabled, LACP Member Added,

LACP Port Failure

GVRP: GVRP Disabled, GVRP Enabled

VLAN: Port-based VLAN Enabled, Tag-based VLAN Enabled

Module Swap: Module Inserted, Module Removed, Dual Media Swapped

Function name:

134

Publication date: Sep, 2009

Revision A8

 

Page 146
Image 146
ICP DAS USA MSM-6226 user manual Alarm Configuration