3-10. LLDP
The switch supports the LLDP. For current information on your switch model, The Link Layer Discovery Protocol (LLDP) provides a
3-10-1 . LLDP State
Function name:
LLDP State
Function description:
The LLDP state function, you can set per port the LLDP configuration and the detail parameters, the settings will take effect immediately.
Fig. 3-18-1 LLDP parameter
Parameter description:
Tx Interval： To changes the interval between consecutive transmissions of LLDP advertisements on any given port. (Default: 30 secs)
Tx Hold ： The specifies the amount of time the receiving device holds a Link Layer Discovery Protocol (LLDP) packet before discarding it. (Default: 4 times)
Tx Delay : The specifies the delay between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. (Default: 2 secs)
Tx Reinit : The specifies the minimum time an LLDP port waits before
73 | Publication date: Sep, 2009 | |
Revision A8 | ||
|
