reinitializing LLDP transmission. (Default: 2 secs)
The minimum interval for LLDP data change Notification fpr the same neighbor. Refer to IEEE
: To enable or disable the LLDP mode per port. There are four type includes Disable, Tx_Rx, Tx only and Rx only
: To evoke the outbound LLDP advertisements, includes an alphanumeric string describing the port.
: To evoke the outbound LLDP advertisements, includes the system’s assigned name
: To evoke outbound LLDP advertisements, includes an alphanumeric string describing the full name and version identification for the system’s hardware type, software version, and networking application.
: To evoke outbound advertisements, includes a bitmask of system capabilities (device functions) that are supported. Also includes information on whether the capabilities are enabled.
Mgmt Addr : To evoke outbound advertisements, includes information on management address. you can use to include a specific IP address in the outbound LLDP advertisements for specific ports
Notification : Default: Disabled.
Enables or disables each port for sending notification to configured SNMP trap receiver if an LLDP data change is detected in an advertisement received on the port from LLDP neighbor.
