ICP DAS USA MSM-6226 user manual Network Interface of Option transceiver, Cable and Maximum Length

Hardware Specifications

￿Standard Compliance: IEEE802.3ab / 802.3z / 802.3u / 802.3x

802.3z and 802.3ab compliant Gigabit Ethernet ports

￿Network Interface of Option transceiver:

Configuration	Mode	Connector	Port
SFP.0LC.202	1000FDX	*LC M-M	2(Option)
SFP.0LC.212.XX	1000FDX	*LC S-M	2(Option)
SFP.0BL.621.20X	1000FDX	*BiDi-LC S-M	2(Option)
GBI.ZSC.202	1000FDX	*SC M-M	2(Option)
GBI.ZSC.212.XX	1000FDX	*SC S-M	2(Option)
GBI.ZSC.621.20X	1000FDX	*BiDi-SC S-M	2(Option)

*: Default module

￿Transmission Mode: 10/100Mbps support full or half duplex 1000Mbps support full duplex only

￿Transmission Speed: 10/100/1000Mbps for TP

1000Mbps for Fiber

￿Full Forwarding/Filtering Packet Rate: PPS (packets per second)

Forwarding Rate	Speed
1,488,000PPS	1000Mbps
148,800PPS	100Mbps
14,880PPS	10Mbps

￿MAC Address and Self-learning: 8K address table entries, 256 VLAN table entries,

256 IP multicast table entries,

￿Buffer Memory: Embedded 256KB packet buffers and 128KB control memory.

￿Flow Control: IEEE802.3x compliant for full duplex

Backpressure flow control for half duplex

￿Cable and Maximum Length:

TP

1000Base-SX SC M-M

1000Base-LX SC S-M

1000Base-FX WDM SC S-M

Cat. 5 UTP cable, up to 100m

Up to 220/275/500/550m,

which depends on Multi-Mode Fiber type

Single-Mode Fiber, up to10/30/50Km

Single Fiber, BiDi 20Km

￿ Diagnostic LED:
System LED :	Power
	CPURUN
	ACT (LEDSET)
	FDX (LEDSET)
	SPD (LEDSET)
Per Port LED:
10/100M TP Port 1 to 24	: LINK/ACT, FDX, SPD