6.5.1 Hard Disk Setup
[OVERWRITE ENABLED]
If you select Yes, then recording continues and overwrites the previous recording when the hard disk drive space is full.
If you select No, then recording stops when the hard disk drive is full. It won’t record until “overwrite enable” is “Yes” (Fig. 6.14).
Fig. 6.14
[FORMATING THE HARD DISC DRIVE]
Fig. 6.15
If you format the hard drive, all the video data stored on the hard drive will be deleted. Remember that the system has no restore option once the hard drive is formatted.
When you select this option, it will ask you for the password before formatting. The
default password is “111111”. Enter the
password and select “Enter” (Fig. 6.15).
Fig. 6.16 | Fig. 6.17 |
When the Hard Drive is successfully formatted, you will see the message blinking (Fig. 6.16), if the password is incorrect, you will see the message below blinking (Fig. 6.17).
Enter the correct password again if this message appears (Fig. 6.18).
Fig. 6.18
19
