Sanyo va-sw3050 instruction manual Search Procedure, Using the Date and Time Dialog

Video Search

■Search Procedure

<Search example>

In this section, the following conditions are used to explain the search procedure.

•The cameras and recorded videos to be searched:

Camera Nos. 1 to 4; alarm and normal recordings

•Searched period:

18 hours from 12:00 pm, Jan. 10, 2006

1Set the screen mode to 4-part split screen mode and display the live videos from camera Nos. 1 to 4.

In searching the recorded video, the cameras from which the live video is displayed are searched.

MEMO:

You can search recorded videos from 16 cameras simultaneously in the 16-part split screen mode.

2Select [Search Image] from [Edit] in the menu bar.

The [Search Image] screen appears.

3Selectboxes.the [Alarm] and [Normal] check

36

Using the [Date and Time] Dialog

Selecting the month and year displays the calendar of that month. Click the date, specify the time using the [Hour] and [Min] pull-down menus and click [Set]. This sets the beginning of the date and time and closes the dialog.

5Set the period to “18-Hour” using the [Length] pull-down menu.

6Click [Search].

This starts searching the videos recorded by alarm and normal recording for the specified period.

7The search result display

The search results are displayed in the search result area. The alarm recording video is shown as the red bar, and the normal recording video is shown as the blue bar.

5
	Calendar 4
icon

4Specify the beginning date and time to “2006/1/10/12/00” using the [Year/Month/ Day/Hour/Min] pull-down menus.

By clicking the calendar icon on the left end, you can also specify the beginning date and time from the calendar in the [Date and Time] dialog.

English 29

Alarm recording	Normal
(red)	recording
	(blue)