JBL CS5, CS3 manual FRONT-PANEL Controls,  Main Information Display

Page 7

FRONT-PANEL CONTROLS

English

 Main Information Display

3 USB On-the-Go Input

1 Power On/Off (Standby)

4 Headphone Jack

2 Open/Close

 

Main Information Display: This display delivers messages and status indications to help you operate the CS3/CS5 receiver.

1Power On/Off (Standby): Press the button once to turn the

CS3/CS5 receiver on, press it again to put the unit in the Standby mode. Note that when the CS3/CS5 receiver is switched on, the power indicator around the button turns blue.

2Open/Close: Press this button to open or close the disc tray.

3USB On-the-Go Input: This input may be used to temporarily connect a USB thumb device or portable hard disk for direct play- back of audio, image of video files or a USB hub. The USB inputs are designed to power a single USB device at a time. If additional hard disks are connected through a hub, it is necessary that addi- tional external power supplies are used to power the hub and hard disks.

4Headphone Jack: This jack may be used to listen to the system’s output through a pair of headphones. Be certain that the headphones have a standard 3.5mm stereo phone plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use.

7

Image 7
Contents OWNER’S Guide Table of Contents Introduction Description and FeaturesThank you for choosing JBL Safety Information Terminology Features  Main Information Display Power On/Off Standby Headphone Jack Open/ClosePower On/Off Standby Press the button once to turn FRONT-PANEL ControlsRepeat Indicators Disc Type IndicatorsFRONT-PANEL Display REAR-PANEL Connections REAR-PANEL Connections Remote Control Remote Control Basic Information Installation and Connections Digital In- and Outputs Speaker PlacementOptional Audio Connections Aux Input for External Source Aux Output for RecordingFirst Turn-On Connecting the AC PowerBasic Playback Preparation Slow-Motion Playback With DVD Only Disc Playback Features Skipping Tracks or Titles/ChaptersFast-Motion Playback/Fast Search Freeze Frame and Frame Advance With DVD OnlySystem Settings System SetupSystem Defaults Setup MenuAudio Settings Delay Audio AdjustmentOutput Level Adjustment DivX Video On Demand Video AdjustmentTest Screen Information Displays Using the Status Bar MenuPLAYER/RADIO Menu Disc Shows the type of the discRadio Menu Selecting PresetsRearranging the Station List RDS Station ID Removing PresetsAuto Preset Function Surround Mode for TunerDigital In Menu TV MENU, AUX MENU, Digital in MenuTV Menu AUX MenuSurround Modes USB Menu Macro Programming Learning Codes from a Remote ControlProgram Indicator Erasing Learned CodesErased Erasing Macro CommandsWhen the Program Indicator Press the TV SelectorDVD Language Codes Troubleshooting Disc does not play Audio language cannot be changed when you play a DVDSubtitles cannot be turned off when you play a DVD Angles cannot be changed when you play a DVDGlossary Specifications PRO Sound Comes Home Declaration of Conformity