USB Menu

CS systems are among the first to allow direct playback of compatible files from portable USB devices. Two USB On-the-Go inputs are available, one on the right side of the product and one on the rear panel.

Connect your USB thumb drive or portable hard disk to either of the side or rear-panel USB Inputs 3. If you have more than two devices that you would like to connect at the same time, you can use a standard USB-hub with an external power supply, to which you can connect up to 16 portable USB devices.

1.Press the USB 1 or USB 2 0 buttons on the remote control to turn the DVD receiver on. Also make sure that your video monitor connected to the CS3/CS5 is switched on.

2.The TV monitor will show the below screen, allowing you to select which of the file types available on the device you would like to display and play. Showing different file types at the same time (such as MP3 and JPEG) is possible.

3.Move the cursor to the buttons on the lower left side of the screen, and press Enter 6 to select or deselect the requested file types.

In case several USB devices are connected, all will be shown in the same USB menu. To differentiate the drives, they will be shown as 1 and 2. USB drives can have more than one partition. If that is the case, the different partitions will be shown as 1a, 1b, 1c etc.

The USB menu contains the following settings or indications. Follow the explanations in the Upper Menu Line on the bottom of your screen to change the settings.

Disc: Shows the type of the disc.

Audio: Shows the audio track that is currently playing. Options are shown on both menu lines on the bottom of the screen.

Playlist: Sets the order in which the current disc is played back.

Repeat: Sets the repeat mode. (Repeat 1, Repeat Folder).

Random: Activates Random Playback when possible.

Picture: Selects the interval between the current picture on the screen and the next one.

In the USB menu, the chapter, track or picture currently playing will be marked with an arrow symbol in front of the Track (MP3, WMA) or Picture (JPEG). Tracks and pictures can be selected from this list at any time by moving the cursor to the desired track or file and pressing Enter 6 to confirm.

The top part of this screen can be deactivated to show the com- plete Track list on the screen. To deactivate, move the cursor to the upper INFO (or i INFO) submenu on the left side of the screen. Press Enter 6 until the icon is highlighted in light blue and the full Track list is visible on the screen. In the same way the Disc list can be removed from the screen by deactivating the Program submenu.

When the CS3/CS5 is in Play mode, pressing the Play G button on the remote control will highlight the track being played.

If you have a USB device that contains both music files (MP3, WMA) and JPEG images, you can choose to run these simultane- ously, mixing the MP3 or WMA audio with your own images. The time interval can be chosen in the Picture Setting.

With such devices, you can also either listen to the MP3 or WMA audio or watch the JPEG video files only. In order to do so, click in Stop mode on the Music, Picture or Movie icons on the left part of the screen to select or deselect the desired format.

NOTE: The CS3/CS5 will not play back any of the formats SVCD/VCD, MPEG1 (Video), MPEG2 (Video) and audio CD tracks (CDDA) stored on an external USB hard drive.

•You will need a FAT32 preformatted external hard disk drive with USB connector. If your disk is formatted with another file system (such as NTFS), you will need to reformat it. Please contact your hard disk supplier for more information.

•We recommend creating folders and sort the files by file type (movies, pictures or music). This will allow you to quickly find the file you’re looking for.