Jensen HD5212 operation manual Specifications

~

Specifications

HD5212

General

Power Supply	11 to 16VDC, negative ground
Power Antenna (Blue)	500mA max, current limited protection
Operating Temperature	-20C - 65C
Fuse	15-amp, ATO type
DIN chassis dimensions	7" X 7" X 2" (178mm x 178mm x 50mm)
Specifications subject to change without notice.

CEA Power Ratings

Power Output		13 Watts RMS x 4 channels into 4-0hms@ ~ 1% THD+N
Signal to Noise Ratio		70dBA below reference (Reference: 1 Watt,4-0hms)
Frequency Response		20 Hz - 20 kHz, -3dB. (Aux Input used as reference input)
Reference Supply Voltage			14.4VDC
CD Player
Compatible Disc Media			CD-RlRW
Compatible Media Formats			CD-DA, MP3, WMA
Signal to Noise Ratio @ 1 kHz. .		. . . . . . . . . . . . .	. . . . . . . . . . . . . . . . . . . . . . . . . .. >90dB
Frequency Response			20Hz to 20 kHz, -3dB
Channel Separation			> 60dB @ 1 kHz
D/A Converter			1bitlchannel
FM Tuner
Tuning Range			87.5MHz - 107.9MHz
Mono Sensitivity (-30dB). . . .	. . .	. . . . . . . . • . . . .	. . . . . . . . . . . . . . . . . . . . . . . . . . .. 11 dBf
Quieting Sensitivity (-50dB)			15dBf
Signal to Noise Ratio @ 1 kHz			58dB
Stereo Separation @ 1 kHz			>30dB
Frequency Response			30Hz - 12kHz, -3dB
AM Tuner
Tuning Range			530 kHz - 1710 kHz
Sensitivity (-20dB)			15uV
Signal to Noise Ratio @ 1 kHz			50dB
Frequency Response			50Hz - 2kHz, -3dB
Auxiliary Input
Input Sensitivity			AOOmV RMS for 1 watt RMS into 4-ohms
Frequency Response	_. _	_	20Hz to 20kHz, -3dB
Input Impedance		_	10k ohms

26