Front Panel Release, Detaching the Front Panel

HD5212

Front Panel Release

The'"(open) button (9) releases the mechanism that holds the front panel to the chassis.

Detaching the Front Panel

To detach the front panel:

1.Press and hold the power button (1) to turn the unit off.

2.Press the open button (9) and allow the front panel to fold down.

3.Pull to release the right side of the panel.

4.Pull the left side of the panel to remove it.

5.After removing the front panel, store it in the supplied carrying case and take it with you when you leave the car.

Re-attaching the Front Panel

To re-attach the front panel, make sure the electrical terminals on the back of the panel are free of dust and dirt, as debris could cause intermittent operation or other malfunctions. Position the right side of the panel in place until correctly engaged, then lightly press the left side of the panel until the mechanism locks it into place.

Precautions when Handling the Front Panel

Do not drop the front panel.

Do not put pressure on the display or control buttons when detaching or re-installing the front panel.

Do not touch the contacts on the front panel or on the main unit body. It may result in poor electrical contact. Remove any dirt or foreign substances with a clean, dry cloth.

Do not expose the front panel to high temperatures or direct sunlight. Keep all volatile agents (e.g. benzene, thinner, or insecticides) from touching the front panel

Do not attempt to disassemble the front panel.