Jensen BT1613 Reconnecting, Disconnecting the Phone from the Head Unit, Managing Incoming Calls

BT1613

Reconnecting

Automatic Re-connection

The unit has a built-in Auto Re-connection function. When a paired phone is in range, the head unit will automatically reconnect with the mobile phone when the ignition key is turned on (only if the mobile phone was previously paired with the head unit).

Manual Re-connection

Under the following conditions, you may need to reconnect manually:

•If the mobile phone is out of range (more than 2 meters from the head unit).

•If the connection is lost and while talking on the phone (or there is an incoming call) more than 2 meters from the head unit.

•When doing an audio transfer from the phone back to the head unit.

To manually reconnect with the paired phone, perform the following steps:

1.Press and hold the DISP button (9) to access the MENU.

2.Press the DISP button again to select the “RE-CON” option.

•The LCD displays “WAIT >>>” during the re-connection period.

•If the re-connection is successful, the LCD displays “OK” and returns to the previous mode.

•If the re-connection fails, the LCD displays “FAIL” and automatically returns to the previous mode.

Disconnecting the Phone from the Head Unit

To manually disconnect with the paired phone, perform the following steps:

1.Press and hold the DISP button (9) to access the MENU.

2.Press the DISP button again to select the “RE-CON” option.

3.Turn the AUDIO CONTROL (3) to select “DIS-CON”.

•The LCD displays “WAIT >>>” during the disconnection period.

•If the disconnection is successful, the LCD Display displays “OK” and returns to the previous mode.

Managing Incoming Calls

When there is an incoming call, the LCD will display the phone number. If the incoming call cannot be displayed, the LCD will display “PHONE IN”.

NOTE: When a call comes in during stand- by mode (ignition on/power off), the head unit will turn on automatically so you can accept/reject the call.

NOTE: When a call comes in during talking mode, the OPEN/EJECT button (12) becomes deactivated.

Answering an Incoming Call

To answer the incoming call, press the AUDIO CONTROL button (4).

NOTE: During an incoming call, the audio output is muted and a ringtone is played. CD play is paused.

Use the AUDIO CONTROL (3) to adjust the volume during your phone conversation. During an active call, the LCD will display “TALK #.##”, with the number signs representing elapsed call time.

To end the conversation, press the BAND button (5).

Rejecting an Incoming Call

Press the BAND button (5) to reject an incoming call.

19